Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1 Applicable Documents
All available documents for the product www.festo.com/sp.è
2 Safety
2.1 Safety instructions
– Before working on the product, switch off the power supply and secure it
against being switched on again.
2.2 Intended use
The solenoid valve is intended for mounting on a drive with a NAMUR plug pattern
in accordance with VDI/VDE3845 Sheet1:2010-09.
3 Additional information
– Accessories www.festo.com/catalogue.è
4 Product overview
4.1 Included in scope of delivery
VSNC-F...-M52-...-P2
1Basic valve (1x)
single solenoid,
5/2 or 3/2
2Screw (2x)
3O-ring 3x1 (2x)
4O-ring 16x2 (1x)
5Sheet metal seal (1x)
6Coding pin (1x)
Fig. 1 VSNC-F...-M52-...-P2
VSNC-F...-B52-...-P2
1Basic valve (1x)
double solenoid 5/2
2Screw (2x)
3O-ring 3x1 (4x)
4O-ring 16x2 (2x)
6Coding pin (1x)
Fig. 2 VSNC-F...-B52-...-P2
VSNC-F...-P53...-...-P2
1Basic valve (1x)
double solenoid 5/3
2Screw (2x)
3O-ring 3x1 (4x)
4O-ring 16x2 (2x)
6Coding pin (1x)
Fig. 3 VSNC-F...-P53...-...-P2
4.2 Not in scope of delivery
Pilot valve
7Pilot valve (1x)
MGXDH-3/2-1.2-…-EX,
MGXIAH-3/2-0.8-24DC-EX
8Screw (2x)
M4x35
Fig. 4
Connector
9Connector (1x)
VABF-B14-P1-G18,
VABF-B14-P1-N18
10 Screw (2x)
M4x16
Fig. 5
5 Preassembly
Fig. 6
• Press O-rings into the recesses[A].3
5.1 With electrical control
Fig. 7
1. Place pilot valves on the basic valve .7 1
2. Tighten screws . Tightening torque:1.4Nm±10%8
5.2 With pneumatic control
Fig. 8
1. Place the connectors on the basic valve .9 1
2. Tighten screws . Tightening torque:1.4Nm±10%aJ
8149698
VSNC-F...-M52/-B52/-P53...-...-P2
Solenoid valve
8149698
2021-01
[8149700]
Assembly instructions
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com