Fisher & Paykel RF402BRXFDU6 Manual

Fisher & Paykel Køleskab RF402BRXFDU6

Læs gratis den danske manual til Fisher & Paykel RF402BRXFDU6 (2 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Fisher & Paykel RF402BRXFDU6, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

INSTALLATION INSTRUCTIONS

NZ AU GB AE HK SG IE EU CN IN

Refrigerator Surround Kit

E402B, RF402B, E442B, RF442B, E522B, RF522B, RF522W, RF522A, RF540A and RF610A models

continued >

IMPORTANT!

SAVE THESE INSTRUCTIONS

The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model

and specification availability in your country, please go to our website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.

1 Check that the internal cabinetry dimensions are correct (see Diagram 1a/b).

2 Unpack the refrigerator as per instructions on carton.

IMPORTANT!

Due to the size of the refrigerator(s), it is essential that assembly of the surround kit be undertaken with a minimum of two able-

bodied persons.

It is important to include adequate venting to the top of the refrigerator, to ensure efficient operation.

The installation of the refrigerator(s) can be at floor level as shown in Diagram 1a or installed above the toe kick board as in

Diagram1b.

Rollers and feet must be fitted.

Refrigerators installed above the toe kit should have a floor base constructed to support the total weight of the loaded

refrigerator(s) placed on it.

The placement of the 16mm MDF or plywood under the refrigerator(s) on either installation type is to allow the fitment of the bottom

trim that covers it. It is optional.

GETTING STARTED

This kit is designed to be used with models with a refrigerator height of between: 1695 – 1806mm with curved or flat door styling.

You can find the part number for each installation in Section 2.

To give the most integrated look, the kitchen cabinetry should be flush with the front of the refrigerator door.

Tools required (not included)

No. 2 drill bit – long.

Electric drill.

Phillips screwdriver.

1 x 16mm piece of MDF the same size as the base of the cavity (optional). Not needed if refrigerator is sitting

directly on the floor and not on raised toe kickarea.

Joiner kit (part number 819264) required if joining two refrigerators side by side.

REFRIGERATOR SURROUND KIT

E402B

RF402B

E402B

RF402B

E402B

RF402B

E442B

RF442B

E442B

RF442B

E442B

RF442B

E522B

RF522B

RF522W

E522B

RF522B

RF522W

E522B

RF522B

RF522W

RF522A RF540A

RF610A

REFRIGERATOR MODEL 1 X E402B

1 X RF402B

2 X E402B

2 X RF402B

1 X E442B

1 X RF442B

2 X E442B

2 X RF442B

1 X E522B

1 X RF522B

1 X RF522W

2 X E522B

2 X RF522B

2 X RF522W

1 X RF522A

(French door model)

1 X RF540A

1 X RF610A

(French door model)

CAVITY DIMENSIONS (Flush to edge of door) mm mm mm mm mm mm mm mm

AWidth 807 10721467 1557 962 1777 962852

BDepth* 700 700 700 700 700 700 700 700

C 1Height** 1790 1790 1790 1790 1790 1790 1790 1875

C 2Height*** 1806 1806 1806 1806 1806 1806 1806 1891

DAir vent depth 200 200 200 200 200 200 200 200

EAir vent width 502 1162 1252547 657 6571472 767

KIT PART NUMBERS LH RH LH RH LH RH

Brushed Stainless 24371 24372 24373 24375 2437624374 24377 24381 2438024378 24379

Plus Joiner Kit 819264 819264 819264

* Depth is a minimum requirement.

** Height is without 16mm MDF packer.

*** Height is with 16mm MDF packer.

Cavity dimensions above are to be used as dimensions.minimum

Diagram 1a

Refrigerator at floorlevel

Diagram 1b

Refrigerator above toekick

Diagram 1

KIT PART NUMBERS AND CAVITY DIMENSIONS TABLE

All dimensions are internal or cavity dimensions.

The refrigerator can be installed:

1 In a cavity with 16mm panel (bottom trim attached), or in a cavity where the product

is at floor level (no bottom trim). (Diagram 1a).

2 In a cavity with a toe kick under the product with the bottom trim fitted to the base

(Diagram 1b).

3 Check whether your fridge has hinges concealed by the front of the fridge door.

For refrigerators / freezers where the hinge is not concealed by the door refer to

spare parts for the correct kit number. 820413 D should list non concealed number kit.

BEFORE INSTALLATION

Concealed hinge Non concealed hinge

Produkt Specifikationer

Mærke:	Fisher & Paykel
Kategori:	Køleskab
Model:	RF402BRXFDU6

Har du brug for hjælp?

Hvis du har brug for hjælp til Fisher & Paykel RF402BRXFDU6 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Køleskab Fisher & Paykel Manualer

Fisher & Paykel RF178WRNUX1 Manual

1 Oktober 2025

Fisher & Paykel RF178ANJX1 Manual

1 Oktober 2025

Fisher & Paykel RF178WRNJX1 Manual

30 September 2025

Fisher & Paykel RB2470BRV2 Manual

30 September 2025

Fisher & Paykel RF178WRNX1 Manual

30 September 2025

Fisher & Paykel RB6018BRV Manual

30 September 2025

Fisher & Paykel RF178ANX1 Manual

30 September 2025

Fisher & Paykel RF178ANUX1 Manual

30 September 2025

Fisher & Paykel E450LWW Manual

5 September 2025

Fisher & Paykel P120LS Manual

5 September 2025

Køleskab Manualer

Nyeste Køleskab Manualer

Westinghouse WTM2500AA Manual

29 Oktober 2025

Westinghouse WHE5650SD Manual

29 Oktober 2025

Westinghouse WTM2500BA Manual

29 Oktober 2025

MBM A70BTR Manual

28 Oktober 2025

Magic Chef MCCM31ST Manual

27 Oktober 2025

Magic Chef HMCR320RE Manual

26 Oktober 2025

MBM T72BTAR Manual

26 Oktober 2025

MBM EF20BP Manual

26 Oktober 2025

Structural Concepts Harmony HMO3953R Manual

25 Oktober 2025

Structural Concepts Reveal NR4847DSV Manual

25 Oktober 2025