Fluval M200 Manual

Fluval Varmeapparat M200

Læs gratis den danske manual til Fluval M200 (9 sider) i kategorien Varmeapparat. Denne vejledning er vurderet som hjælpsom af 73 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 37 anmeldelser. Har du et spørgsmål om Fluval M200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

Name/Nom/Nombre:

Address/Adresse/Dirección:

City/Ville/Ciudad: Prov./State:

Postal-Zip Code/Code postal/Código postal:

Date of Purchase/Date de l'achat/Fecha de compra:

Store/Magasin/Tienda:

City/Ville/Ciudad: Prov./State:

Was this a gift/S’agit-il d’un cadeau?/¿Lo recibió de regalo?



Yes/Oui/Sí



No/Non/No

Age/Âge/Edad: Sex/Sexe/Sexo:



F Tel./Tél.:

Size of Aquarium/Volume de l’aquarium/Tamaño del acuario:

Type(s) of Fish/Espèce(s) de poissons/Tipo(s) de peces:

D/J M/M Y/A

Return to validate your warranty - In order to help us serve you better, please complete and mail in

this Registration Card. Or if you prefer, you may register on our website (www.hagen.com).

À retourner pour valider votre garantie - Afin de nous aider à mieux vous servir, veuillez remplir et

retourner cette Carte d'enregistrement. Ou bien, vous pouvez enregistrer le modèle sur notre site

Web . (www.hagen.com)

Devuélvala para validar su garantía: Para que podamos brindarle un mejor servicio, complete y envíe

por correo esta tarjeta de registro. Si lo prefiere, puede inscribirse a través de nuestro sitio web

(www.hagen.com).

www.hagen.com

M 300

Art. A787

WARRANTY REGISTRATION CARD

When complete, place Warranty Registration Card in an envelope, affix correct postage and mail to:

CARTE D’ENREGISTREMENT DE LA GARANTIE

Déposer la carte de garantie dûment remplie dans une enveloppe suffisamment affranchie et poster à :

TARJETA DE REGISTRO DE LA GARANTÍA

Una vez llenada, coloque la tarjeta de registro de la garantía en un sobre debidamente franqueado y envíela a:

CANADA

Rolf C. Hagen Inc.

20500 Trans Canada Hwy,

Baie d’Urfé, Québec H9X 0A2

U.S.A.

Rolf C. Hagen (U.S.A.) Corp.,

305 Forbes Blvd,

Mansfield, MA. 02048

To register online, visit our website at www.hagen.com

Pour l’enregistrement en ligne, visiter notre site Web à www.hagen.com

Para el registro en línea, visite nuestro sitio web en www.hagen.com

the receptacle. If the plug or receptacle does get wet, DON T unplug the cord. Disconnect the fuse or

circuit breaker that supplies power to the appliance. Then unplug and examine for presence of water

in receptacle.

3. Close supervision is necessary when any appliance is used by or near children. This appliance is not

intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given supervision or instruction concerning use

of the appliance by a person responsible for their safety. Children should be supervised to ensure that

they do not play with the appliance.

4. To avoid injury, do not contact hot parts.

5. CAUTION - Always unplug or disconnect all appliances in the aquarium from electricity supply before

placing hands in water, before putting on or taking o parts and while the equipment is being installed,

maintained or handled. When inserting or removing the heater from the water, always pull out the mains

electricity plug and do not pull the equipment out of the water until it has been allowed to cool for at

least 30 minutes. Never yank cord to pull plug from outlet. Grasp the plug and pull to disconnect. Always

unplug an appliance from an outlet when not in use.

6. Do not use an appliance for other than intended use (i.e.: don’t use this heater in swimming pools,

garden ponds, bathrooms, etc.). The use of attachments not recommended or sold by the appliance

manufacturer may cause an unsafe condition.

7. This heater is suitable for INDOOR use only. Do not install or store the appliance where it will be exposed

to the weather or to temperatures below freezing.

8. Make sure that the heater is securely installed before operating it. The heater must be immersed in

water at least up the MIN. WATER LEVEL indicated (but without exceeding the depth of 100 cm). This

aquarium heater must never operate outside of water. For CSA/North America version: Water must not

rise above the MAX WATER LINE indicated.

9. If an extension cord is necessary, a cord with proper rating should be used. A cord rated for less

amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so

that it will not be tripped over or pulled. The connection should be carried out by a qualied electrical

installer.

10. SAVE THESE INSTRUCTIONS

INSTALLATION

Note: It is recommended to ll the aquarium with water that is close to the desired temperature you are

trying to achieve. The aquarium heater must be positioned to allow for free circulation of water around the

glass heater tube. Generally, the heater should be placed at the rear of the aquarium, preferably close to a

source of water movement to ensure even and thorough distribution of warmed water. Be sure there are no

rocks, decorations or gravel obstructions touching the heater to create uneven heat in the glass tube and

weaken it.

CAUTION - Water level should not rise above the maximum water line or below the minimum indicated on

the glass heater tube. Always maintain the water level in the aquarium to compensate for water loss due to

evaporation.

1. Select the appropriate temperature by adjusting the Temperature Dial to the appropriate degree

calibration.

2. Position the heater in the aquarium with the heater mounting bracket attached. Press suction cups rmly

against glass to adhere to the aquarium wall. Wait 30 minutes before connecting to the electrical outlet.

This allows the heater to adjust to the aquarium water temperature.

3. Note that it may take up to 12 hours for the heater to attain the water temperature you have selected.

It is only after this time that the Easy-Set Temperature Dial should be adjusted to achieve a higher or

lower temperature, as required.

4. The unit heats only when the pilot light is illuminated. When the pre-selected temperature is reached,

the pilot light shuts o. It will light again only when the heater is required to maintain the temperature

at the selected level.

5. The temperature should be veried with an accurate thermometer after the heater has reached the

desired temperature, before any sh are added to the aquarium, and throughout the life of the

aquarium.

*HEATER PERFORMANCE VARIABLES

This heater was designed to reach and maintain the set temperature, provided that the maximum

dierence between the ambient and set temperature is less than 10ºC (18ºF).

Variables such as lower room temperature, wide temperature uctuations, lack of an aquarium cover,

presence of pumps and lters or aquarium placement in proximity to cooling sources may require a higher

wattage for proper control. If the set temperature is not reached in all conditions, it will probably be

necessary to increase the heating power.

We recommend monitoring aquarium temperature on a regular basis with an accurate thermometer such

as the Marina Aquarium Thermometers.

CAUTION- This or any aquarium heater must never be operated outside of water. Before removing from

water, unplug and allow 30 minutes for heater to cool. Always unplug heater during water changes or

maintenance.

MAINTENANCE

Clean the heater tube regularly to remove deposits that could impair the heater performance.

Deposits on heater can be removed by soaking the heater tube in vinegar, then rinse with fresh water

before repositioning in aquarium.

3 YEAR WARRANTY

The Fluval M series Submersible Aquarium Heater is guaranteed for defective parts and workmanship for a

period of 3 year. We reserve the right to repair or replace, at our option. This guarantee excludes damage,

breakage of the glass tube or injuries resulting from negligence or other misuse. This warranty does not

include responsibility for animate or inanimate matter contained in the aquarium and is limited to the

heater unit only. This appliance is factory sealed, tampering will void warranty.

FOR AUTHORIZED GUARANTEE REPAIR SERVICE:

Return with dated receipt and $4.00 for postage and handling to:

CANADA: Hagen Industries, Consumer Repair, 3235 Guénette, Montréal QC H4S 1N2

U.S.A.: Rolf C. Hagen (U.S.A.) Corp., 305 Forbes Blvd, Mansled, MA. 02048

If you have a problem, or have questions about the operation of this product, please let us try to help you

before you return the product to your dealer. Most problems can be handled promptly with a toll-free phone

call. Or, if you prefer, you can contact us on our web site at

www.hagen.com.

CALL US ON OUR TOLL-FREE NUMBER:

Canada only: 1-800-554-2436 between 9:00 a.m. and 4:30 p.m.

U.S. only: 1-800-724-2436 between 9:00 a.m. and 4:00 p.m.

Eastern Standard Time. Ask for Customer Service

Produkt Specifikationer

Mærke:	Fluval
Kategori:	Varmeapparat
Model:	M200

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluval M200 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Varmeapparat Fluval Manualer

13 Juli 2024

13 Juli 2024

13 Juli 2024

13 Juli 2024

13 Juli 2024

10 Juli 2024

10 Juli 2024

10 Juli 2024

10 Juli 2024

10 Juli 2024

Varmeapparat Manualer

Nyeste Varmeapparat Manualer

Lavex 761AMLV75 Manual

15 Juni 2025

XPower A-12 Manual

15 Juni 2025

BEKO RHO8323BT Manual

14 Juni 2025

DeWalt DXAM-2260 Manual

14 Juni 2025

AlorAir Zeus 900 Manual

14 Juni 2025

XPower B-55 Manual

14 Juni 2025

XPower B-2 Manual

14 Juni 2025

XPower M-27 Manual

14 Juni 2025

B-Air Vent VP-34 Manual

14 Juni 2025

XPower P-80 Manual

14 Juni 2025