Fluval M100 Manual


Læs gratis den danske manual til Fluval M100 (9 sider) i kategorien Varmeapparat. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Fluval M100, eller vil du spørge andre brugere om produktet?

Side 1/9
Name/Nom/Nombre:
Address/Adresse/Dirección:
City/Ville/Ciudad: Prov./State:
Postal-Zip Code/Code postal/Código postal:
Date of Purchase/Date de l'achat/Fecha de compra:
Store/Magasin/Tienda:
City/Ville/Ciudad: Prov./State:
Was this a gift/S’agit-il d’un cadeau?/¿Lo recibió de regalo?
Yes/Oui/Sí
No/Non/No
Age/Âge/Edad: Sex/Sexe/Sexo:
M
F Tel./Tél.:
Size of Aquarium/Volume de l’aquarium/Tamo del acuario:
Type(s) of Fish/Espèce(s) de poissons/Tipo(s) de peces:
D/J M/M Y/A
Return to validate your warranty - In order to help us serve you better, please complete and mail in
this Registration Card. Or if you prefer, you may register on our website (www.hagen.com).
À retourner pour valider votre garantie - Afin de nous aider à mieux vous servir, veuillez remplir et
retourner cette Carte d'enregistrement. Ou bien, vous pouvez enregistrer le modèle sur notre site
Web . (www.hagen.com)
Devuélvala para validar su garantía: Para que podamos brindarle un mejor servicio, complete y envíe
por correo esta tarjeta de registro. Si lo prefiere, puede inscribirse a través de nuestro sitio web
(www.hagen.com).
www.hagen.com
M 200
Art. A784
www.hagen.com
WARRANTY REGISTRATION CARD
When complete, place Warranty Registration Card in an envelope, affix correct postage and mail to:
CARTE D’ENREGISTREMENT DE LA GARANTIE
Déposer la carte de garantie dûment remplie dans une enveloppe suffisamment affranchie et poster à :
TARJETA DE REGISTRO DE LA GARANTÍA
Una vez llenada, coloque la tarjeta de registro de la garantía en un sobre debidamente franqueado y envíela a:
CANADA
Rolf C. Hagen Inc.
20500 Trans Canada Hwy,
Baie d’Urfé, Québec H9X 0A2
U.S.A.
Rolf C. Hagen (U.S.A.) Corp.,
305 Forbes Blvd,
Mansfield, MA. 02048
To register online, visit our website at www.hagen.com
Pour l’enregistrement en ligne, visiter notre site Web à www.hagen.com
Para el registro en línea, visite nuestro sitio web en www.hagen.com
appliance should be discarded. Never cut the cord.
D. To avoid the possibility of the appliance plug or receptacle getting wet, position the appliance to one side
of a wall mounted receptacle to prevent water from dripping onto the receptacle or plug. A “drip loop” (see
illustration B) should be arranged by the user for the cord connecting appliance to a receptacle. The “drip
loop” is that part of the cord below the level of the receptacle or the connector if an extension cord is used,
to prevent water from traveling along the cord and coming in contact with the receptacle. If the plug or
receptacle does get wet, DON’T unplug the cord. Disconnect the fuse or circuit breaker that supplies power
to the appliance. Then unplug and examine for presence of water in receptacle.
3. Close supervision is necessary when any appliance is used by or near children. This appliance is not intended
for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be supervised to ensure that they do not
play with the appliance.
4. To avoid injury, do not contact hot parts.
5. CAUTION - Always unplug or disconnect all appliances in the aquarium from electricity supply before placing
hands in water, before putting on or taking o parts and while the equipment is being installed, maintained or
handled. When inserting or removing the heater from the water, always pull out the mains electricity plug and
do not pull the equipment out of the water until it has been allowed to cool for at least 30 minutes. Never
yank cord to pull plug from outlet. Grasp the plug and pull to disconnect. Always unplug an appliance from an
outlet when not in use.
6. Do not use an appliance for other than intended use (i.e.: don’t use this heater in swimming pools, garden
ponds, bathrooms, etc.). The use of attachments not recommended or sold by the appliance manufacturer
may cause an unsafe condition.
7. This heater is suitable for INDOOR use only. Do not install or store the appliance where it will be exposed to
the weather or to temperatures below freezing.
8. Make sure that the heater is securely installed before operating it. The heater must be immersed in water at
least up the MIN. WATER LEVEL indicated (but without exceeding the depth of 100 cm). This aquarium heater
must never operate outside of water. For CSA/North America version: Water must not rise above the MAX
WATER LINE indicated.
9. If an extension cord is necessary, a cord with proper rating should be used. A cord rated for less amperes or
watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be
tripped over or pulled. The connection should be carried out by a qualied electrical installer.
10. SAVE THESE INSTRUCTIONS
INSTALLATION
Note: It is recommended to ll the aquarium with water that is close to the desired temperature you are trying
to achieve. The aquarium heater must be positioned to allow for free circulation of water around the glass heater
tube. Generally, the heater should be placed at the rear of the aquarium, preferably close to a source of water
movement to ensure even and thorough distribution of warmed water. Be sure there are no rocks, decorations
or gravel obstructions touching the heater to create uneven heat in the glass tube and weaken it.
CAUTION - Water level should not rise above the maximum water line or below the minimum indicated on the
glass heater tube. Always maintain the water level in the aquarium to compensate for water loss due to
evaporation.
1. Select the appropriate temperature by adjusting the Temperature Dial to the appropriate degree calibration.
2. Position the heater in the aquarium with the heater mounting bracket attached. Press suction cups rmly
against glass to adhere to the aquarium wall. Wait 30 minutes before connecting to the electrical outlet. This
allows the heater to adjust to the aquarium water temperature.
3. Note that it may take up to 12 hours for the heater to attain the water temperature you have selected. It is
only after this time that the Easy-Set Temperature Dial should be adjusted to achieve a higher or lower
temperature, as required.
4. The unit heats only when the pilot light is illuminated. When the pre-selected temperature is reached, the
pilot light shuts o. It will light again only when the heater is required to maintain the temperature at the
selected level.
5. The temperature should be veried with an accurate thermometer after the heater has reached the desired
temperature, before any sh are added to the aquarium, and throughout the life of the aquarium.
*HEATER PERFORMANCE VARIABLES
This heater was designed to reach and maintain the set temperature, provided that the maximum dierence
between the ambient and set temperature is less than 10ºC (18ºF).
Variables such as lower room temperature, wide temperature uctuations, lack of an aquarium cover, presence
of pumps and lters or aquarium placement in proximity to cooling sources may require a higher wattage for
proper control. If the set temperature is not reached in all conditions, it will probably be necessary to increase
the heating power.
We recommend monitoring aquarium temperature on a regular basis with an accurate thermometer such as the
Marina Aquarium Thermometers.
CAUTION- This or any aquarium heater must never be operated outside of water. Before removing from water,
unplug and allow 30 minutes for heater to cool. Always unplug heater during water changes or maintenance.
MAINTENANCE
Clean the heater tube regularly to remove deposits that could impair the heater performance.
Deposits on heater can be removed by soaking the heater tube in vinegar, then rinse with fresh water before
repositioning in aquarium.
3 YEAR WARRANTY
The Fluval M series Submersible Aquarium Heater is guaranteed for defective parts and workmanship for a
period of 3 year. We reserve the right to repair or replace, at our option. This guarantee excludes damage,
breakage of the glass tube or injuries resulting from negligence or other misuse. This warranty does not include
responsibility for animate or inanimate matter contained in the aquarium and is limited to the heater unit only.
This appliance is factory sealed, tampering will void warranty.
FOR AUTHORIZED GUARANTEE REPAIR SERVICE:
Return with dated receipt and $4.00 for postage and handling to:
CANADA: Hagen Industries, Consumer Repair, 3235 Guénette, Montréal QC H4S 1N2
U.S.A.: Rolf C. Hagen (U.S.A.) Corp., 305 Forbes Blvd, Mansled, MA. 02048
If you have a problem, or have questions about the operation of this product, please let us try to help you
before you return the product to your dealer. Most problems can be handled promptly with a toll-free phone call.
Or, if you prefer, you can contact us on our web site at
www.hagen.com.
CALL US ON OUR TOLL-FREE NUMBER:
Canada only: 1-800-554-2436 between 9:00 a.m. and 4:30 p.m.
U.S. only: 1-800-724-2436 between 9:00 a.m. and 4:00 p.m.
Eastern Standard Time. Ask for Customer Service


Produkt Specifikationer

Mærke: Fluval
Kategori: Varmeapparat
Model: M100

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluval M100 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Varmeapparat Fluval Manualer

Fluval

Fluval M150 Manual

13 Juli 2024
Fluval

Fluval M100 Manual

13 Juli 2024
Fluval

Fluval M200 Manual

13 Juli 2024
Fluval

Fluval T300 Manual

13 Juli 2024
Fluval

Fluval T200 Manual

13 Juli 2024
Fluval

Fluval T100 Manual

10 Juli 2024
Fluval

Fluval P50 Manual

10 Juli 2024
Fluval

Fluval T150 Manual

10 Juli 2024
Fluval

Fluval M300 Manual

10 Juli 2024
Fluval

Fluval T50 Manual

10 Juli 2024

Varmeapparat Manualer

Nyeste Varmeapparat Manualer