Flycam Flowline Edge V1 Manual

Flycam Stativ Flowline Edge V1

Læs gratis den danske manual til Flycam Flowline Edge V1 (6 sider) i kategorien Stativ. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Flycam Flowline Edge V1, eller vil du spørge andre brugere om produktet?

Side 1/6
1
What s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
A s s e m b l y M a n u a l
Flowline Edge V1 Stabilizaon Arm
Flowline Edge V1 Stabilizaon Arm for Flowline Rigs,
Cameras & Gimbals (FLCM- -EDGE V1)
2 x Screws
(Size: 4 x 12)
Height Riser
2mm Allen Key
2 x Screws CSK
(Size: 3 x 8)
2
Similarly, remove the second screw.
Now, remove the Hook from the Flowline
Support Arm (Not Included).
As shown in the image, take the Cord
bundle out from the Cup and pull the Cord
unl a Cord lock comes out.
Separate the Cord and the Cord lock.
Keep the lock aside to re aach it later.-
To detach the Flowline Support Rod
(Not Included), pull it upwards.
Flowline Edge Setup
Loosen the screw of the Camera Hook
aached to the Flowline Support Arm
(Not Included) using the Allen key.
Similarly, separate the Cord from the Cup to
mount it back later.
NOTE: It is recommended to aach the minimum required (weight 3kg / 6lb) for pulling down the
balancing rope to ensure proper operaon of your Flycam Flowline system.


Produkt Specifikationer

Mærke: Flycam
Kategori: Stativ
Model: Flowline Edge V1

Har du brug for hjælp?

Hvis du har brug for hjælp til Flycam Flowline Edge V1 stil et spørgsmål nedenfor, og andre brugere vil svare dig