FoneStar FDT-112 Manual


Læs gratis den danske manual til FoneStar FDT-112 (16 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 3 anmeldelser. Har du et spørgsmål om FoneStar FDT-112, eller vil du spørge andre brugere om produktet?

Side 1/16
INSTRUCTION MANUAL/MANUAL DE INSTRUCCIONES/
MODE D’EMPLOI/MANUAL DE INSTRUÇOES
FDT-112
AUDIO SPLITTER
DISTRIBUIDOR DE AUDIO
DISTRIBUTEUR D'AUDIO
DISTRIBUIDOR DE ÁUDIO
DESCRIPTION
- Audio splitter - 1 mono input to 10 mono outputs or 1 stereo input to 5 stereo outputs.
CONTROLS AND FUNCTIONS
FRONT PANEL
1.- Device on/off switch.
2.- MODE: device operating mode selector. If the mono position is selected, 1 mono audio input will be
distributed to 10 mono outputs. On the other hand, when the stereo position is selected,
1 stereo audio input will be distributed to 5 stereo outputs.
3.- LED input signal level indicators.
4.- : output volume controls.CH 1 OUTPUT/CH 2 OUTPUT
REAR PANEL
1.- GND LIFT: switch to disconnect the ground from the device’s earth socket to avoid ground loops when
the audio source is connected.
2.- : audio signal outputs, XLR connectors.CH 1 OUTPUT/CH 2 OUTPUT
3.- : audio signal link outputs to connect another device in cascade, XLR connectors.OUTPUT LINK
4.- : audio signal input, combo connector (XLR and 6.3 mm jack).CH 2 INPUT
5.- CH 1 (MONO) INPUT: audio signal input, combo connector (XLR and 6.3 mm jack). When the operating
mode selected is mono, connect the audio input signal here.
6.- Power supply cable connection.
7.- Power supply voltage selector.
- 2 -
EN


Produkt Specifikationer

Mærke: FoneStar
Kategori: Højttaler
Model: FDT-112

Har du brug for hjælp?

Hvis du har brug for hjælp til FoneStar FDT-112 stil et spørgsmål nedenfor, og andre brugere vil svare dig