FoneStar FO-473-TX Manual

FoneStar Højttaler FO-473-TX

Læs gratis den danske manual til FoneStar FO-473-TX (20 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om FoneStar FO-473-TX, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
INSTRUCTION MANUAL/MANUAL DE USUARIO/
MODE D’EMPLOI/MANUAL DE INSTRUÇÕES
FO-473-TX, FO-474-RX
HDMI EXTENSION REANSMITTER & RECEIVER
TRANSMISOR Y RECEPTOR EXTENSIÓN HGMI
TRANSMETTEUR ET RÉCEPTEUR EXTENSION HDMI
TRANSMISSOR E RECETOR EXTENSÃO HDMI
EN
DESCRIPTION
THIS MANUAL IS FOR THE FOLLOWING MODELS:
FO-473-TX HDMI 1.3 extension-distributor transmitter over IP.
FO-474-RX HDMI 1.3 extension-distributor receiver via IP.
- Increases the transmission distance of HDMI FULL HD 1080p signals up to 120 m via Cat 6 cable.
The use of Cat 6 cables makes it easier to run the cable through pipes and walls, reducing the difficulty
and time required for installation.
- It features HDMI signal compression and transmission technology over low bandwidth data networks.
- The system is easily scalable, as the HDMI signal is transmitted with direct connection or via the ethernet
network with Gigabit switch (1 Gbps) and IGMP Snooping function, allowing up to 253 receivers to be
connected and providing 1080p@60Hz resolutions.
- In addition, the remote control transmitter allows remote control of the video source from the TV position.
CONTROLS AND FUNCTIONS
TRANSMITTER (mod. FO-473-TX)
INPUT5 V DC, 2 A
IR OUT CAT 6 RESET
1 2
3 4 5
1.- Power supply input for the mains adapter provided.
2.- : digital A/V signal input, HDMI female connector.INPUT
3.- IR OUT: output for connection of remote control transmitter. Connect the cable labelled TX to this CAT
port.
4.- : transmitter output, RJ-45 connector.5e/6
5.- RESET: reset button. Press this button to reset the transmitter if the display shows CHECK TX’S INPUT
SIGNAL.
RECEIVER (mod. FO-474-RX)
IR IN CAT 6 RESET
OUTPUT5 V DC, 2 A
4 5
1 2 3
1.- IR IN: Input for connection of the remote control receiver. Connect the cable labelled RX to this CAT
port.
2.- : receiver input, RJ-45 connector.5e/6
3.- : reset button. Press this button to reset the receiver if the display is not receiving a signal. RESET
4.- Power supply input for the mains adapter provided.
5.- : digital A/V output signal, HDMI female connector.OUTPUT

Produkt Specifikationer

Mærke: FoneStar
Kategori: Højttaler
Model: FO-473-TX

Har du brug for hjælp?

Hvis du har brug for hjælp til FoneStar FO-473-TX stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler FoneStar Manualer

FoneStar

FoneStar MOV-684PR-L Manual

30 Juli 2025
FoneStar

FoneStar TILT-064BA Manual

29 Juli 2025
FoneStar

FoneStar MAX-240Z Manual

22 Juli 2025
FoneStar

FoneStar MAZ-1504 Manual

22 Juli 2025
FoneStar

FoneStar FSD-4500E Manual

22 Juli 2025
FoneStar

FoneStar MSH-883-570 Manual

22 Juli 2025
FoneStar

FoneStar SONAIR-2M Manual

22 Juli 2025
FoneStar

FoneStar FO-44HV Manual

21 Juli 2025
FoneStar

FoneStar STV-685N Manual

21 Juli 2025
FoneStar

FoneStar PROX-60Z Manual

21 Juli 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Valcom

Valcom VIP-480AL-W-SA Manual

30 Juli 2025
Rockustics

Rockustics StoneHenge II-S/T Manual

30 Juli 2025
Valcom

Valcom InformaCast VIP-428A-IC Manual

30 Juli 2025
Valcom

Valcom InformaCast VIP-431A-IC Manual

30 Juli 2025
Electro-Voice

Electro-Voice Evid 4.2T Manual

30 Juli 2025
Audiocase

Audiocase S10 Manual

30 Juli 2025
JLab

JLab JBuds Party Manual

30 Juli 2025
Valcom

Valcom InformaCast VIP-411A-IC Manual

30 Juli 2025
Marshall

Marshall Middleton II Manual

30 Juli 2025
Audiocase

Audiocase S5 Manual

30 Juli 2025