FoneStar FS-1240E Manual

FoneStar Højttaler FS-1240E

Læs gratis den danske manual til FoneStar FS-1240E (16 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 12 anmeldelser. Har du et spørgsmål om FoneStar FS-1240E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

INSTRUCTION MANUAL/MANUAL DE INSTRUCCIONES/

MODE D’EMPLOI/MANUAL DE INSTRUÇOES

FS-1240E

PA POWER AMPLIFIER

ETAPA DE POTENCIA DE MEGAFONÍA

AMPLIFICATEUR DE PUISSANCE POUR LA SONORISATION

ETAPA DE POTÊNCIA DE MEGAFONIA

DESCRIPTION

- Ω Mono power ampliﬁer, 300 W max., 240 W RMS with low impedance loudspeaker output 4 y 8 and 100

and 70 V lines. Specially designed for PA and sound systems.

- Automatic compression function of input signal which avoids output signal distortion when the input signal

is of a high level and automatically reduces the output signal if the temperature of the ampliﬁer exceeds

certain limits.

- Three protection circuits: temperature, short circuit in the output and surge, they are activated when an

anomaly is detected in the operating, cutting off the audio output to avoid damage.

CONTROLS AND FUNCTIONS

FRONT PANEL

1.- : . POWER LED ampliﬁer power indicator

2.- Power ampliﬁer on/off switch.

3.- PROT: LED protection indicators. They light up when protection is activated due to temperature, a

surge or shortcircuit. With the protection activated the audio output is cut off. In this case, switch off

the power ampliﬁer, eliminate the causes of the fault and let the device reset itself for a few minutes

before switching on again.

4.- CLIP: LED signal peak indicator. If it is dimly or occasionally lit, the output volume should be reduced,

in this case the compression function is activated. If the LED indicator remains permanently lit this is

due to the input signal having a very high level and exceeding the range of the compression function.

In this case, reduce the input signal volume.

5.- : LED output signal indicator. SIGNAL

6.- : Treble, mid, bass tone controls ±12 dB. TREBLE, MID, BASS

7.- : general volume output control. MASTER

REAR PANEL

1.- Ventilator.

2.- DC INPUT: power supply terminals 24 V DC. To operate the power ampliﬁer use 24 V DC power supply,

batteries, etc. Respect the polarity of the source of the external power supply.

- 2 -

Produkt Specifikationer

Mærke:	FoneStar
Kategori:	Højttaler
Model:	FS-1240E

Har du brug for hjælp?

Hvis du har brug for hjælp til FoneStar FS-1240E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler FoneStar Manualer

FoneStar MALIBU-308 Manual

25 August 2025

FoneStar MOV-684PR-L Manual

30 Juli 2025

FoneStar TILT-064BA Manual

29 Juli 2025

FoneStar MAX-240Z Manual

22 Juli 2025

FoneStar MAZ-1504 Manual

22 Juli 2025

FoneStar FSD-4500E Manual

22 Juli 2025

FoneStar MSH-883-570 Manual

22 Juli 2025

FoneStar SONAIR-2M Manual

22 Juli 2025

FoneStar FO-44HV Manual

21 Juli 2025

FoneStar STV-685N Manual

21 Juli 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Moonki MA-MT265B Manual

13 September 2025

Moonki MW-212LT220 Manual

13 September 2025

Moonki MO-R88BT Manual

13 September 2025

Moonki MO-L2077BT-V2 Manual

13 September 2025

Moonki MD-PB360 Manual

13 September 2025

Hertz Cento CPK 690 Manual

13 September 2025

Adam T7V Manual

12 September 2025

Klipsch Flexus SURR 100 Manual

12 September 2025

Klipsch Detroit Manual

12 September 2025

Adam A3X Manual

12 September 2025