Franke KEPWSBF Manual


Læs gratis den danske manual til Franke KEPWSBF (25 sider) i kategorien Vanddispenser. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Franke KEPWSBF, eller vil du spørge andre brugere om produktet?

Side 1/25
VERSAFILLER
®
Drinking Fountain/Sports Bottle Filler
Combo Installation Instructions
Models:
KEPWSBF
KEPWSBFF with VersaFilter III
The Hands-Free Sports Bottle Filler mounts directly onto Versacooler
®
I and II
products. No additional electrical connections are required.
If installed onto a refrigerated cooler, chilled water can be dispensed through
the Sports Bottle Filler. Otherwise, room temperature water will be dispensed.
The Sports Bottle Filler. is shipped partially assembled.
On the combo units, the cooler is plumbed and ready to attach to the Sports
Bottle Filler.
When completed, the finished assembly will look like this:
•1
OR
3/8” pilot drill and either a step drill bit up to 7/8” diameter that will drill through
SS top or 7/8” diameter punch die (retrofit version only)
Electric drill; wrench for punch die
Small tubing cutter for copper tube
1/4“ nut driver
# 2 Phillips screwdriver
#15 torx bit driver
What’s Included:
Tools required:
Section 1: Getting Started
38” of ¼ OD plastic
tubing with 38” of
sponge tubing
insulation
Rubber
Gasket
Installation
instructions
Quick connect
tee fitting
Snap bushings 7/8”
VersaFiller Bottle
Filler
Top Cap
VersaFilter III
(Model KEPWSBFF
only)
Quick connect
elbow fitting
06/24 | FRANKE 030099-680A
2


Produkt Specifikationer

Mærke: Franke
Kategori: Vanddispenser
Model: KEPWSBF

Har du brug for hjælp?

Hvis du har brug for hjælp til Franke KEPWSBF stil et spørgsmål nedenfor, og andre brugere vil svare dig