Garmin GHS 10 Manual

Garmin Radio GHS 10

Læs gratis den danske manual til Garmin GHS 10 (12 sider) i kategorien Radio. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Garmin GHS 10, eller vil du spørge andre brugere om produktet?

Side 1/12
GHS10/10i handset
installation instructions
instructions d’installation
istruzioni di installazione
installationsanweisungen
instrucciones de instalación
GHS 10/10i Installation Instructions EN-1
These installation instructions are for
the GHS 10 and GHS 10i handsets.
The GHS 10 is for use with the Garmin
VHF 200 radio and the GHS 10i is for
use with the Garmin VHF 200i radio.
For additional information, refer to the
VHF 100/200 Series Radio Installation
Instructions that came with your radio.
For operational instructions, refer to
your VHF 100/200 Series Radio Owners
Manual.
The handset comes with a 32.8 ft. (10 m)
extension cable, a bulkhead mounting
plate, a weather cap, and the necessary
cable hardware.
Install the GHS 10 or GHS 10i
handset at least 20 in. (500
mm) from any compass.
To connect the GHS 10 or GHS 10i
handset:
1. Using the mounting plate as a
template, use a center punch to mark
the three screw locations on the
surface.
2. Use a pencil to trace the cable hole in
the center of the mounting plate. Set
the mounting plate aside.
3. Use a in. (22 mm) hole saw to cut
the cable-mounting hole.
4. Use a in. (3 mm) drill to drill the
three mounting-plate holes.
GHS 10/10i Installation Instructions
Mounting
plate
Weather cap Cable nut
Cable-mounting
hole
External speaker
wires


Produkt Specifikationer

Mærke: Garmin
Kategori: Radio
Model: GHS 10

Har du brug for hjælp?

Hvis du har brug for hjælp til Garmin GHS 10 stil et spørgsmål nedenfor, og andre brugere vil svare dig