Garmin VIRB Remote Manual

Garmin Fjernbetjening VIRB Remote

Læs gratis den danske manual til Garmin VIRB Remote (14 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Garmin VIRB Remote, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/14
VIRB™ Remote Instructions.............................................................................................................. 2
Instructions de la télécommande VIRB™.......................................................................................... 4
VIRB™ Istruzioni del telecomando.................................................................................................... 6
VIRB™ Fernbedienung – Anweisungen............................................................................................ 8
VIRB™ Instrucciones del mando a distancia................................................................................... 10
Instruções do controlo remoto VIRB™............................................................................................ 12
Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. VIRB™ and ANT+™ are trademarks of Garmin Ltd. or its subsidiaries. These
trademarks may not be used without the express permission of Garmin.
This product is ANT+™ certified. Visit for a list of compatible products and apps.www.thisisant.com/directory
July 2014 190-01627-90_0DPrinted in Taiwan
TA-2013/2179
TRA
REGISTERED No:
ER0127480/14
DEALER No:
DA0061884/11
VIRB™ Remote Instructions
Remote Overview
ÀRecord key. Select to record video on connected devices.
ÁPhoto key. Select to capture a photo on connected devices.
ÂStop key. Select to stop recording video on connected devices.
ÃStatus LED.
Status LED
LED Activity Status
Flashing green Searching for a paired device.
Alternating red and green Attempting to pair with a device.
12 rapid green flashes Successfully paired with a device.
Four rapid green flashes Successfully sent a command to a device.
Four rapid red flashes Failed to send a command to a device.
Flashing red Device is recording video.
Pairing the Remote with Your Device
The first time you connect the VIRB remote to your VIRB
device, you must pair the remote with your device.
1On the VIRB device, select > > to SETUP Remote Remote
turn on the remote control feature.
2On the VIRB remote, select any key.
The status LED starts flashing green.
3On the VIRB remote, hold two keys simultaneously until the
status LED starts alternating green and red, and release the
keys.
The remote searches for your VIRB device. When the
remote pairs successfully, the status LED flashes green 12
times.
After the remote is paired, it connects to your device whenever
the device is in range and turned on.
Using the Mounts
Several mounts are available for your remote, either included
with the product or as an optional accessory. The mounts allow
you to attach the remote to your body, your bike, or other
objects.
• Align two of the notches À with the sides of the mount, and
press the remote into the mount until it clicks.
• Press gently on the release tab Á, and lift the remote from
the mount.
Replacing the Battery
WARNING
Do not use a sharp object to remove batteries.
Keep the battery away from children.
Never put batteries in mouth. If swallowed, contact your
physician or local poison control center.
Replaceable coin cell batteries may contain perchlorate
material. Special handling may apply. See
www.dtsc.ca.gov.hazardouswaste/perchlorate.
CAUTION
Contact your local waste disposal department to properly
recycle the batteries.
Before you can replace the battery, you must have a small
Phillips screwdriver, a small flat screwdriver, and a CR2032
lithium coin-cell battery.
1Using a Phillips screwdriver, remove the three screws from
the back plate À.
2Remove the back plate from the remote.
3Wrap the end of a small flat screwdriver with tape.
The tape protects the battery, battery compartment, and
contacts from damage.
4Carefully pry the battery from the back plate.
5Install the new battery into the back plate with the positive
side facing down.
6Verify the gasket Á is fully seated in the groove.
2

Produkt Specifikationer

Mærke: Garmin
Kategori: Fjernbetjening
Model: VIRB Remote

Har du brug for hjælp?

Hvis du har brug for hjælp til Garmin VIRB Remote stil et spørgsmål nedenfor, og andre brugere vil svare dig


Fjernbetjening Garmin Manualer

Garmin

Garmin GHS 20 Manual

27 Maj 2023
Garmin

Garmin VIRB Remote Manual

9 Januar 2023
Garmin

Garmin eBike Remote Manual

25 December 2022
Garmin

Garmin GHS 20i Manual

23 December 2022

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Insignia

Insignia NS-RMTLG21 Manual

2 Oktober 2025
Insignia

Insignia NS-RMTSAM21 Manual

1 Oktober 2025
Hama

Hama Universal Remote 00221064 Manual

1 Oktober 2025
WiiM

WiiM Remote Manual

1 Oktober 2025
WiiM

WiiM Remote 2 Manual

1 Oktober 2025
Absima

Absima CR7P Manual

29 September 2025
Insignia

Insignia NS-RMTSNY21 Manual

29 September 2025
Insignia

Insignia NS-RMT8D21 Manual

29 September 2025
ProMaster

ProMaster PRO5439 Manual

29 September 2025
Insignia

Insignia NS-RMTVIZ21 Manual

29 September 2025