Gemini 7057 Manual

Gemini Bilalarm 7057

Læs gratis den danske manual til Gemini 7057 (5 sider) i kategorien Bilalarm. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Gemini 7057, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

7057

7056

...................................

...........................................................

CERTIFICAT D' INSTALLATION

INSTALLATION CERTIFICATE

EINBAUBESCHEINIGUNG

Je soussigné,installateur,certifie d'avoir fait personnellement l'installation du dispositif d'alarme

du véhicule ci décrit,conforme aux instructions du constructeur.

The undersigned,qualified installer,attests to have personally fitted the here described Vehicle

Security system following the manufacturer instructions.

Der Installateur bestätigt mit seiner Unterschrift, daß die Alarmanlage in dem genannten Fahrzeug

nach Vorgaben Des Herstellers eingebaut wurde.

Signature,Firma,Assinatura,Unterschrift .................................................................

CERTIFICADO DE INSTALACION

El que suscribe, instalador, certifica el haber seguido personalmente la instalación del dispositivo

de alarma del vehículo descrito a continuación, de acuerdo con las instrucciones del fabricante.

CERTIFICATO DI INSTALLAZIONE.

Il sottoscritto,installatore,certifica di aver eseguito personalmente l'installazione del dispositivo

di allarme del veicolo descritto qui di seguito,conformemente alle istruzioni del fabbricante.

No forest has been destroyed to

produce this 100% recycled paper.

by GEMINI TRADING S.r.l. Via Luigi Galvani 12 21020 Bodio Lomnago (VA) Italia

Tel. +39 0332 943211 - Fax +39 0332 948080

E-mail : info@gemini-alarm.com

By :

Da :

Par :

Von :

Por :

Sold on :

Venduto il :

Vendu le :

Verkauft am :

Vendido el :

Type of product :

Tipo di prodotto :

Produktartikel :

Type de dispositif:

Dispositivo ciclo :

Auto

Car

Véhicule

Fahrzeug

Veículo

7208

0682

7057

7056

AC2506-REV.00/04/01

DESCRIPTION

Gemini 7057

Gemini 7057 is a compact, self-powered alarm with sensors and siren. Studied for vehicles

equipped with original transmitter and direction indicator lights flashing while opening and

closing the vehicles door.

Gemini 7056

As Gemini 7057 without self-power and engine immobilisation.

FUNCTIONS

- Control for alarm arming/disarming through the direction indicators lights and controls for the

vehicles lock actuators.

- Blinker and electronic siren.

- Perimetrical protection and volumetric protection only for Kit 7057US and Kit 7056US.

- Positive and negative control for vehicles equipped with “Pack-comfort” system.

- Engine immobilisation (only 7057).

- Negative control external additional siren.

- Automatic arming.

- Absorption sensor.

- LED’s memory.

The alarm system is supplied with two mechanical keys for the emergency release.

INSTALLATION INSTRUCTIONS (for the installer).

- It is necessary to memorise the arming/disarming sequence controls through the direction indicator

lights after the wiring connections.

- The alarm wiring harness must be positioned away from the vehicle high voltage wires in order to

avoid interference which could generate wrong working of the system.

- On vehicles with catalytic converter, the engine immobilisation must be carried out on the fuel

pump.

- For systems with volumetric sensors (art. 7057US e 7056US), the transducers must be installed at

the top of each windscreen pillar, far from the ventilation or the conditioning air outputs.

- Note: to obtain the correct working of the automatic arming and perimetrical protection functions,

connect the GREEN -BROWN wire to the boot/door switches.

DIP SWITCHES PROGRAMMING TABLE

1 ON Current absorption sensor ON

1 OFF Current absorption sensor OFF

2 ON Passive arming ON

2 OFF Passive arming OFF

3 ON Arming/disarming acoustic signalling OFF

3 OFF Arming/disarming acoustic signalling ON

4 ON Arming/disarming control through the direction indicator lights and the

vehicle lock actuators.

4 OFF Arming/disarming control through the direction indicator lights.

ATTENTION: SELECT THE DIP-SWITCHES BEFORE TURNING THE EMERGENCY KEY TO ON.

ACCORDING TO THE RULES POSITION THE DIP-SWITCH N.1 TO OFF.

WIRING CONNECTIONS

(DISCONNECT THE NEGATIVE TERMINAL OF THE BATTERY AND ONLY RE-CONNECT AFTER THE

INSTALLATION IS COMPLETE)

FUNCTIONS WIRE COLOURS

Earth êê BLACK initialled M

Battery positive terminal êê BLACK initialled R

Engine immobilisation êê 2x GREY initialled H

Ignition live êê YELLOW

Door pin switch êê GREEN-BROWN

Boot/bonnet pin switch êê BLACK initialled V

Positive alarm armed êê PINK

Sensors inlet êê GREEN-BLACK

Negative comfort control additional siren êê YELLOW-BLACK

Positive Comfort control êê RED-BLACK

Negative Comfort control êê WHITE-BLACK

Arming/disarming control through the direction

indicator lights + Blinker. êê 2 x ORANGE

Arming Synchronism control êê YELLOW-BLUE

Disarming Synchronism control êê GREEN-BLUE

NOTE: connect always the synchronism controls (YELLOW-BLUE and GREEN-BLUE wires) to

the two polarity reversal wires of the L.H.S. actuators lock.

The wiring harness is supplied with two connectors; connect the 4 pin connectors to the ultrasonic

module and the two pin connector to the LED.

SELF-LEARNING FUNCTION OF THE DIRECTION INDICATOR LIGHTS

FLASHING SEQUENCES.

IMPORTANT: BEFORE ACTIVATING THE SELF-LEARNING FUNCTION, IT IS NECESSARY TO SELECT

CORRECTLY THE DIP-SWITCHES AND TO CARRY OUT THE WIRING CONNECTIONS. DO NOT USE THE

TRANSMITTER BEFORE HAVING ACTIVATED THE SELF-LEARNING FUNCTION.

THIS FUNCTION ALLOWS MEMORISING THE SEQUENCE OF THE DIRECTION INDICATOR LIGHTS

FLAHING WHILE OPENING OR CLOSING THE DOOR.

To activate the self-learning function proceed as follows:

- Position the alarm key to OFF.

- Turn the ignition key to ON.

- Position the alarm key to ON.

- The LED of the alarm lights.

- Turn the ignition key to OFF.

- Close the vehicle door with the original transmitter. The LED stops lightning at the first

direction indicator lights flashing. One audible tone signals the door closure.

Note: wait always till the audible tone before learning the door opening.

- Open the vehicle door with the original transmitter. The LED stops lightning at the first

direction indicator lights flashing. Two audible tones signal the end of the self-learning

operation of the 7057 or 7056 system.

THE ACOUSTIC SIGNALLING CAN BE OBTAINED ALSO WITH THE DIP-SWITCH

N. 3 TO ON.

Produkt Specifikationer

Mærke:	Gemini
Kategori:	Bilalarm
Model:	7057

Har du brug for hjælp?

Hvis du har brug for hjælp til Gemini 7057 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bilalarm Gemini Manualer

23 September 2024

20 September 2024

15 September 2024

22 August 2024

14 August 2024

13 August 2024

13 August 2024

12 August 2024

12 August 2024

12 August 2024

Bilalarm Manualer

Nyeste Bilalarm Manualer

Audiovox Code Alarm CA 1055 Manual

29 August 2024

Audiovox CA1155E Manual

29 August 2024

Audiovox Code Alarm CA 1155 Manual

29 August 2024

HP Rotary Lock Manual

26 August 2024

Spy FM5000 Manual

23 August 2024

Jablotron CA-321 Accent Manual

22 August 2024

GT GT-913 Manual

21 August 2024

Clifford Concept 50X Manual

21 August 2024

Clifford IntelliGuard 950 Manual

21 August 2024

Clifford Concept 50 Manual

21 August 2024