Gemini 7060 Manual

Gemini Bilalarm 7060

Læs gratis den danske manual til Gemini 7060 (9 sider) i kategorien Bilalarm. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Gemini 7060, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

7060

AC 2529 - REV. 00 / 06 / 01

No forest has been destroyed to

produce this 100% recycled paper.

by GEMINI TRADING S.r.l. Via Luigi Galvani 12 21020 Bodio Lomnago (VA) Italia

Tel. +39 0332 943211 - Fax +39 0332 948080

E-mail : info@gemini-alarm.com

7208

0682

INSTALLATION MANUAL

DESCRIPTION

GEMINI 7060

The system 7060 is an alarm unit that can be installed on vehicles with 12 volts battery (negative earth).

FUNCTIONS

- Remote controlled alarm unit with dynamic code.

- Blinker, universal central door locking control, electric windows and sunroof closure for selected vehicles

equipped with “Pack Comfort” system.

- Perimetric protection and outlet for additional modules.

- Controls for self-powered siren, additional siren (continuous or alternate sound) and horn.

- LED’s Memory.

- - Acoustic activation/de activation (through siren or horn).

- Remote controlled panic function and / or boot opening.

- Electric engine immobilisation.

- Alarm unit functions programmable through the transmitter.

The unit is equipped with two 2-channel transmitters (art. 7208E), frequency 433.92 Mhz.

USEFUL SUGGESTIONS FOR THE INSTALLATION

- Connect the positive and negative feeding wire of the alarm system to the battery.

- Connect always the alarm Green-Brown wire to the door pin switch.

- On catalysed vehicles the engine immobilisation must be carried out on the fuel pump and the starter motor.

- Avoid routing connection wires next to interference sources.

- The ultrasonic heads must be positioned at the top of each windscreen pillar and must be pointing at each

opposite diagonal corner away from the facia outlets.

WIRING CONNECTIONS

Disconnect the negative terminal of the battery and only re-connect after the installation is complete.

FUNCTION WIRE COLOR

Earth ðð BROWN

Battery positive terminal ðð RED

Engine immobilisation (max. 10 A) ðð 2 X GREY

Ignition live ðð YELLOW

Direction indicator lights ðð 2 x ORANGE

Door pin switch ðð GREEN-BROWN

Boot/bonnet pin switches ðð GREEN

Positive alarm armed ðð PINK

External sensors inlet ðð GREEN-BLACK

Self-powered siren control ðð BLUE

Common +/- siren or klaxon ðð BLACK

Additional siren or horn control ðð YELLOW-BLACK

Negative control boot opening ðð GREY-BLACK

Comfort ðð WHITE-BLACK

Central door locking ðð

YELLOW- -BLUE, RED BLUE, YELLOW-GREY,

RED-GREY, YELLOW- -BROWN, RED BROWN

Note: The wiring harness has 2 connectors: connect the 2-pin connector to the LED and the 4-pin

connector to an additional module (shock, ultrasonic or super-high frequency module).

"DIP SWITCHES PROGRAMMING TABLE"

1 OFF Comfort POSITIVE

2 ON Comfort NEGATIVE

2 OFF Automatic arming OFF

2 ON Automatic arming ON

3 OFF Self-learning of a new code OFF (normal use)

3 ON Self-learning of a new code ON

4 OFF Closure short * period

4 ON Closure 6 seconds

* THE SHORT TIME IS SET FROM THE PROGRAMMING WITH THE TWO-CHANNELS TRANSMITTER

BETWEEN 0,5 SECONDS AND 1 SECOND.

ATTENTION : SET THE DIP SWITCHES BEVOR FEEDING THE 7060 UNIT.

TABLE OF PROGRAMMABLE FUNCTIONS THROUGH THE TWO-CHANNELS TRANSMITTER.

ACTIONS

ALARM CONDITION VISIBLE

ACTIONS

LED FLASHING AND

SELECTED FUNCTIONS

ALTERNATIVE

ACTIONS

POWER OFF Alarm OFF - - -

Turn the ignition

key to ON

Alarm OFF

FEED THE UNIT

7060

Alarm ON

Press on the

transmitter 1 button

within 10 seconds

Access to the Set-up 1 function:

Supplementary siren One blinker

flashing

One flashing = continuous

Two flashing = intermittent

Press on the

transmitter 1 button

Access to the Set-up 2 function:

acoustic signalling with

supplementary siren 725

Two blinker

flashing

One flashing = de-activated

Two flashing = activated

Press on the

transmitter 1 button

Access to the Set-up 3 function:

Panic and boot opening through

the transmitter

Three

blinker

flashing

One flashing = Panic and

additional siren

Two flashing = Boot opening

Press on the

transmitter 1 button

Access to the Set-up 4 function:

boot opening while alarm armed

(Panic excluded)

Four blinker

flashing

One flashing =

While alarm disarmed

Two flashing =

For both functions

Press on the

transmitter 1 button

Access to the Set-up 5 function:

vehicle check while arming the

system

Five blinker

flashing

One flashing = de-activated

Two flashing = activated

Press on the

transmitter 1 button

Access to the Set-up 6 function:

closure control period Six blinker

flashing

One flashing = 0,5 seconds

Two flashing = 1 seconds

Press on the

transmitter 1 button

Access to the Set-up 7 function:

Automatic arming with door

closure

Seven

blinker

flashing

One flashing = activated

Two flashing = de-activated

Press on the

transmitter 1 button Access to the Set-up 8 function:

Comfort

Eight

blinker

flashing

One flashing = while closing

Two flashing = after the

closure

Press on the

transmitter

button N. 2 to

change the

selected option.

De-activate the

+15 to memorise

the selected

options and to

exit from User

set-up.

Turn the ignition

key to OFF Set-up exit, normal working

of the alarm - - -

Produkt Specifikationer

Mærke:	Gemini
Kategori:	Bilalarm
Model:	7060

Har du brug for hjælp?

Hvis du har brug for hjælp til Gemini 7060 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bilalarm Gemini Manualer

23 September 2024

20 September 2024

15 September 2024

22 August 2024

14 August 2024

13 August 2024

13 August 2024

12 August 2024

12 August 2024

12 August 2024

Bilalarm Manualer

Nyeste Bilalarm Manualer

Audiovox Code Alarm CA 1055 Manual

29 August 2024

Audiovox CA1155E Manual

29 August 2024

Audiovox Code Alarm CA 1155 Manual

29 August 2024

HP Rotary Lock Manual

26 August 2024

Spy FM5000 Manual

23 August 2024

Jablotron CA-321 Accent Manual

22 August 2024

GT GT-913 Manual

21 August 2024

Clifford Concept 50X Manual

21 August 2024

Clifford IntelliGuard 950 Manual

21 August 2024

Clifford Concept 50 Manual

21 August 2024