Gemini 7622 Manual

Gemini Bilalarm 7622

Læs gratis den danske manual til Gemini 7622 (4 sider) i kategorien Bilalarm. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Gemini 7622, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

AC 2628 Rev. 01 09 04

7624

7622

7621

End user manual

For all EU countries

7624

...................................

...........................................................

Signature

..........................................................................................

By :

Sold on : Type of product :

Car

by GEMINI TECHNOLOGIES S.p.A. Via Luigi Galvani 12

21020 Bodio Lomnago (VA) Italia

Tel. +39 0332 943211 - Fax +39 0332 948080

E-mail: info@gemini-alarm.com

7622

7621

WARRANTY CONDITIONS

This apparatus is guaranteed against all defects of fabrications for a period of

24 month from the installation date shown on this warranty coupon, taking

into consideration the 1999/44/CE.

Therefore, you are kindly requested to fill entirely the guarantee certificate

included in this booklet and to NOT REMOVE the guarantee label from the

device.

Missing or tearing of this label, missing of one part of guarantee certificate or

missing of the enclosed sale document, will invalidate the guarantee. The

guarantee is valid exclusively to Gemini Technologies S.p.A. Authorized

Service Centers.

The manufacturer will decline any responsibility for any eventual

malfunctions of the device, or electrical plant damages of the vehicle, due to

improper installation, use or tampering.

This alarm has exclusively a deterrent function against eventual thefts.

INSTALLATION CERTIFICATE

The undersigned,qualified installer,attests to have personally fitted the here

described Vehicle Security sistem following the manufacturer instructions.

OPERATING DESCRIPTION

COMPLETE ALARM ARMING

Press the lock button on the original radio control of the vehicle.

Arming will be indicated by one turn signal flash and one high tone signal

(BEEP) (if these functions have not been excluded in programming stage).

AUTOMATIC ALARM ARMING

Automatic arming allows to have the alarm system active, 60 seconds after the

engine switching “OFF” and the opening of a door.

For automati arming see at the installation manual or answer to the installer.

ALARM ARMING WITH EXCLUSION OF VOLUMETRIC PROTECTION

AND COMFORT CONTROL

This function allows the user to arm the system, with volumetric protection and

comfort control being excluded

To actieve this function, the system must be disarmed and the ignition key

turned to “OFF” (is not important the position of the driver’s door).

Proceed as follows:

!Introduce the electronic key into the receptacle.

!Vehicle turn signals will flash twice to that the function has been saved to

memory.

!Press the lock button of the vehicle's original radio control.

!The system will indicate successful arming (with volumetric protection

and comfort control exclude) by one long and one shorter flashing of turn

signals and one long and one shorter beep (if these functions have not

been excluded in programming stage).

Note: this function inhibits also positive exit when alarm is armed (Pink wire),

the comfort control and the external sensor inlet (Green-Black wire) and it lasts

just for one arming cycle.

ARMING NEUTRAL TIME AND COMFORT FUNCTION

The arming neutral time lasts for 30 seconds and is indicated by permanent

turning on of the state Led.

During this period, the alarm active the comfort function for 20 seconds, and

the user is allowed to leave the vehicle without provoking any false alarm

condition.

SYSTEM ARMED

After the inhibit time (about 30 sec.), The system is armed and it is ready to

detect any theft attempt.

When the system is properly armed, the LED blinks.

After disarming the system, any occured attempt will be indicated by the alarm

with visual/acoustic signalling..

ALARM, HINIBIT TIME AND ALARM CYCLES

As previously described, any occured attempt will be indicated by the alarm

with visual/acoustic signalling.

After the alarm triggering, before another alarm cause, there are 5 seconds of

“neutral time”, that allow to disarm the system by emergency pin-code.

The alarm signalling has 10 cycles of 30 seconds each for input and arming

cycles.

The ignition key (+15/54) alarm signalling have no limitation.

ALARM DISARMING

Press the unlock button of the vehicle's original radio control.

Disarming is indicated by three turn signal flashes and three acoustic signals (if

these functions have not been excluded in programming stage).

If an alarm condition has occurred, it will be signalled by five turn signal flashes

and five acoustic signals (if these functions have not been excluded in

programming stage).

See next paragraph for all signalling.

ALARM MEMORY

When disarming the alarm, if five turn signal flashes and five beep signals

occur (if these functions have not been excluded in programming stage), it is

possible to identify the cause generating the alarm condition.

To do this, turning the ignition key in “ON” position and see at the vehicle

installed LED.

The LED will be blink, shown the last alarm condition.

The cause of the alarm will indicate for three times.

This indication can be interrupted by turning the ignition key to OFF.

PAG. 4 PAG. 5

LED SIGNAL CAUSE OF THE ALARM

LED OFF (2 seconds) LED ON (1 second)

ALARM CYCLE

NUMBER

Infinite

Absorption sensor

Door, trunk and hood switches

Positive under key (+15/54)

Volumetric and external sensors

Produkt Specifikationer

Mærke:	Gemini
Kategori:	Bilalarm
Model:	7622

Har du brug for hjælp?

Hvis du har brug for hjælp til Gemini 7622 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bilalarm Gemini Manualer

23 September 2024

20 September 2024

15 September 2024

22 August 2024

14 August 2024

13 August 2024

13 August 2024

12 August 2024

12 August 2024

12 August 2024

Bilalarm Manualer

Nyeste Bilalarm Manualer

Audiovox Code Alarm CA 1055 Manual

29 August 2024

Audiovox CA1155E Manual

29 August 2024

Audiovox Code Alarm CA 1155 Manual

29 August 2024

HP Rotary Lock Manual

26 August 2024

Spy FM5000 Manual

23 August 2024

Jablotron CA-321 Accent Manual

22 August 2024

GT GT-913 Manual

21 August 2024

Clifford Concept 50X Manual

21 August 2024

Clifford IntelliGuard 950 Manual

21 August 2024

Clifford Concept 50 Manual

21 August 2024