Gemini 931PSA Manual

Gemini Bilalarm 931PSA

Læs gratis den danske manual til Gemini 931PSA (4 sider) i kategorien Bilalarm. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Gemini 931PSA, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Made in Italy AC 2793 Rev. 00 - 09/10
................................................
..........................................................................................................................
931 PSA
931 PSA
UK
INSTALLATION AND
USE MANUAL
INSTALLATION CERTIFICATE
The undersigned qualified installer attests to have personally fitted the here described vehicle
security system following the manufacturer instructions.
By :
Sold on : T:ype of product
Vehicle :
GEMINI Technologies S.p.A.
Via Luigi Galvani 12 - 21020 Bodio Lomnago (VA) - Italia
Tel. +39 0332 943211 - Fax +39 0332 948080
Web site: www.gemini-alarm.com
Reg. n.532-A
UNI EN ISO 9001:2008
1.0
2.0
3.0
4.0
5.0
6.0
- PRELIMINARY ADVICE.............................................................................................
- WARRANTY CONDITIONS ..................................
- OPERATING DESCRIPTION.....................................................................................
3.1 - Complete system arming.........................................................................................
3.2 - Arming inhibit time....................................................................................................
3.3 - System armed..........................................................................................................
3.4 - Alarm, inhibit time between alarms and alarm cycles..............................................
3.5 - System disarming.....................................................................................................
3.6 - Alarm memory...........................................................................................................
- CONNECTORS TABLES............................................................................................
4.1 - 20-way connector.....................................................................................................
4.2 - 8-way connector.......................................................................................................
- COMPLETE ELECTRIC DIAGRAM...........................................................................
- ............................................................
............................................................................
............................................................................................
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE.......
- TECHNICAL SPECIFICATIONS...............................................................................
USER MANUAL
INSTALLER MANUAL
.....................................................
ULTRASONIC VOLUMETRIC PROTECTION
6.1 - Connections and positioning........
6.2 - Sensor adjustment........
-7.0
8.0
PAGE 02
1.0 - PRELIMINARY ADVICE
Dear Customer, the present manual illustratesthe 931 PSA CAN enabled alarm system, custom
designed for Peugeot/Citroën vehicles.
Throughout this manual specific operating modes or connections are highlighted by the following
signs:
USER MANUAL- PAGE 03
UK TABLE OF CONTENTS
For the installer.
This
.
sign indicates that the functionning of the system can vary according to
connections and programming of the system or it simply provides useful indications for
the installation
!
For the user.
This sign highlights useful information.
3.0 - OPERATING DESCRIPTION
USER M NUALA
3.1 - COMPLETE SYSTEM ARMING
3.2 - ARMING INHIBIT TIME
3.3 - SYSTEM ARMED
3.4 - ALARM, INHIBIT TIME BETWEEN ALARMS AND ALARM CYCLES
3.5 - SYSTEM DISARMING
Press the lock button on the original remote control of the vehicle; the system arming is confirmed by
t30”().
System inhibit arming time lasts approximately 30 seconds and is indicated by the status LED on;
.
After the inhibit time the system is “armed” and ready to detect any theft attempt.
When the system is fully armed, the LED flashes.
The system theft attempt indicated optic signals (turn indicators) and acoustic
signals (vehicle horn).
before another alarm starts, there are 5” of “neutral time”.
The alarm signalling has 10 cycles of 30” each for input and system arming cycles.
Press the unlock button on the original remote control of the vehicle; the system disarming is
confirmed by the status LED off (blinking).
.
(3.6) for possible causes and signals.
he LED turned on steady for pre-arming “neutral time”
s is by the system with
After the alarm has been triggered, but
If an alarm has occurred, the LED starts flashing when ignition key is turned “ON” to signal the last
alarm type
See relative paragraph
it is
possible to exit the vehicle without triggering any alarm
LED SIGNALS ALARM CAUSES Nr. OF ALARM
CYCLES
10
10
10
10
Starting attempt (+15/54)
Doors opening
Bonnet opening
Volumetric sensor
LED ON (1 second)LED OFF (2 seconds)
2.0 - WARRANTY CONDITIONS
This product is guaranteed to be free from manufacturing defects for a period of 24 months from the
installation date shown on this warranty, in compliance with the directive 1999/44/CE.
Please fill-in entirely the guarantee certificate included in this booklet and do NOT REMOVE the
guarantee label from the device.
The warranty will become void if labels are missing or torn, if the installation certificate is not fully
compiled or if the enclosed sale document is missing.
The guarantee is valid exclusively at Authorized Gemini Technologies S.p.A. Centers.
The manufacturer declines any responsibility for eventual malfunctions of the device or any damage
to the vehicle electrical system due to improper installation, use or tampering.
This alarm system is solely intended to be a theft-deterrent device.
PAGE 02
PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 04
PAGE 04
PAGE 04
PAGE 05
PAGE 05
PAGE 05
PAGE 05
PAGE 0B
PAGE 0B
PAGE 02
3.6 - ALARM MEMORY
,t
.
As previously mentioned, the LED memory allows you to identify the last alarm cause.
After disarming the system urn the ignition key “ON” and look at the vehicle status LED; the blinks
indicates the last alarm condition.
The optic signals are repeated 3 times; to interrupt, turn ignition key “OFF”.
The alarm trigger signals and relative causes are indicated in the table below
To disarm the system in case of emergency (remote control out of order), simply turn ignition
key “ON” with system armed.
This type of disarming can ONLY be done with the vehicle ORIGINALKEY.

Produkt Specifikationer

Mærke: Gemini
Kategori: Bilalarm
Model: 931PSA

Har du brug for hjælp?

Hvis du har brug for hjælp til Gemini 931PSA stil et spørgsmål nedenfor, og andre brugere vil svare dig


Bilalarm Gemini Manualer

Gemini

Gemini 7463 Manual

23 September 2024
Gemini

Gemini 7090 Manual

20 September 2024
Gemini

Gemini 7502 Manual

15 September 2024
Gemini

Gemini 823 Manual

22 August 2024
Gemini

Gemini 7673 Manual

14 August 2024
Gemini

Gemini 861 Manual

13 August 2024
Gemini

Gemini 822 Manual

13 August 2024
Gemini

Gemini 862 Manual

12 August 2024
Gemini

Gemini 5260TN Manual

12 August 2024
Gemini

Gemini 7501 Manual

12 August 2024

Bilalarm Manualer

Nyeste Bilalarm Manualer

Audiovox

Audiovox Code Alarm CA 1055 Manual

29 August 2024
Audiovox

Audiovox CA1155E Manual

29 August 2024
Audiovox

Audiovox Code Alarm CA 1155 Manual

29 August 2024
HP

HP Rotary Lock Manual

26 August 2024
Spy

Spy FM5000 Manual

23 August 2024
Jablotron

Jablotron CA-321 Accent Manual

22 August 2024
GT

GT GT-913 Manual

21 August 2024
Clifford

Clifford Concept 50X Manual

21 August 2024
Clifford

Clifford IntelliGuard 950 Manual

21 August 2024
Clifford

Clifford Concept 50 Manual

21 August 2024