Genelec 8250A Manual

Genelec Højttaler 8250A

Læs gratis den danske manual til Genelec 8250A (12 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Genelec 8250A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

8260A, 8250A and 8240A

DSP Loudspeakers

Operating Manual

Introduction

Congratulations and a thank-you for the purchase of this Genel-

ec 8200 Series DSP Loudspeaker. These systems are designed

to integrate easily into the digital production environment. There

are several ways to configure and operate the DSP loudspeakers

for a wide variety of high quality audio applications. The loud-

speakers also have analog inputs, making them versatile and

intelligent replacements for analog loudspeakers.

This manual addresses setting up and using the 8240A, 8250A

and 8260A DSP loudspeakers in stand-alone mode without the

Genelec Loudspeaker Manager GLM™ and the proprietary

Genelec loudspeaker control network. Use with the GLM™ is

described in the DSP System Operating Manual.

EC Declaration Of Conformity

This is to certify that Genelec 8240A, 8250A and 8260A DSP

loudspeakers conform to the following standards:

Safety: EN 60065:2002 + A1:2006 + A11:2008 / IEC 60065:

2001 7th Edition

EMC: EN 55020: 2007 EN 55013: 2001 + A1: 2003, EN 61000-3-

2: 2006 and EN 61000-3-3: 1995 + A1: 2001 + A2: 2005

The products herewith comply with the requirements of The Low

Voltage Directive 2006/95/EC EMC Directive 2004/103/EC and

Energy related Products Directive 2009/125/EC.

Signed:

Ilpo Martikainen

Position: Chairman of the Board

Date: 23-February-2011

Compliance to FCC Rules

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received, including

interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Modifications not expressly approved by the manufacturer could

void the user’s authority to operate the equipment under FCC

rules.

Safety Considerations

Although the 8240A, 8250A and 8260A have been designed in

accordance with international safety standards, to ensure safe

operation and to maintain the loudspeaker under safe operat-

ing conditions, the following warnings and precautions must be

observed:

• Servicing and adjustment must only be performed by

qualified service personnel. The loudspeaker enclosure

must not be opened.

• Do not use this product with an unearthed mains cable or

a mains connection without the protective earth contact as

this may lead to personal injury.

• To prevent fire or electric shock, do not expose the unit to

water or moisture.

• Do not place any objects filled with liquid, such as vases on

the loudspeaker or near it.

• Note that the amplifier is not completely disconnected

from the AC mains service unless the mains power cord is

removed from the amplifier or the mains outlet.

• Free flow of air behind the loudspeaker is necessary to

maintain sufficient cooling.

• Do not obstruct airflow around the loudspeakers.

WARNING!

All Genelec 8200 Series loudspeakers are capable of produc-

ing sound pressure levels in excess of 85 dB, which may cause

permanent hearing damage.

System

Genelec 8240A, 8250A and 8260A DSP Loudspeakers are de-

signed for precise monitoring of 24 bit/192 kHz AES/EBU digi-

tal audio signal or line level analog audio signal. They are fully

compatible with Genelec Loudspeaker Manager GLM™ and the

proprietary Genelec loudspeaker control network, and Genelec

7260A, 7270A and 7271A DSP Active Subwoofers, but can also

be used independently of these. The 8240A, 8250A and 8260A

Produkt Specifikationer

Mærke:	Genelec
Kategori:	Højttaler
Model:	8250A
Bredde:	286 mm
Dybde:	278 mm
Højde:	452 mm
Vægt:	14600 g
Produktfarve:	Sort
Udgangseffekt (RMS):	270 W
Equalizer:	Ingen
Ethernet LAN:	Ja
Anbefalet brug:	Universel
Frekvensområde:	32 - 23000 Hz
Impedens:	- ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Højttaler, type:	2-vejs
Lyd-output kanaler:	1.0 kanaler
Højttaler, placering:	Gulv
LED-indikatorer:	Ja
Antal drivere:	2
Diskanthøjttaler:	Ja
Sensitivitet:	110 dB
Delefrekvens:	1800 Hz
Diskant diameter:	1 "
Bashøjttaler:	Ja
Woofer diameter (britisk mål):	8 "
XLR indgang:	Ja
Egnet til udendørs brug:	Ingen