Genelec 8350APM Manual

Genelec Højttaler 8350APM

Læs gratis den danske manual til Genelec 8350APM (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Genelec 8350APM, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
8350A
8340A
Operating Manual
750-8340A/8350A
2
Introduction
Congratulations and a thank you for the purchase of this Genelec
Smart Active Monitor (SAM) system. This manual addresses
the stand-alone setup and use of the 8340A and 8350A SAM
monitors. These monitors can also be set up and used with
the Genelec Loudspeaker Manager GLM™ and the proprietary
Genelec monitor control network and software, offering much
more versatile acoustic settings and features. Use with the
GLM™ is described in the GLM™ System Operating Manual.
All Genelec SAM systems are designed to integrate easily
into all professional environments, supporting both standard
analog line level audio and AES/EBU formatted digital audio
signals.
The 8340A and 8350A are suitable for professional monitoring
tasks demanding high precision and reliability of monitoring.
The Minimum Diffraction Enclosure™ (MDE™) and advanced
Directivity Control Waveguide™ (DCW™) technologies
provide excellent frequency balance even in difficult acoustic
environments.
Each monitor is supplied with a mains cable, one 5 m GLM
network cable and an operating manual.
Energy saving Intelligent Signal Sensing (ISS™) can be turned
on to put the monitor automatically into a deep sleep state
where the product consumes less than one Watt of power.
Upon sensing an input signal the monitor automatically wakes
up to full operation. The wait until entering the ISS power save
can be configured using the GLM software. When the ISS is
active you can have your monitoring system ready for action
at all times.
System setup using GLM™ Control
Network
Although the 8340A and 8350A can be used without the
GLM™ software and control network, they only reach their
full potential when set up and calibrated using the GLM™
software. Genelec Loudspeaker Manager GLM™ and the
proprietary Genelec monitor control network and software
offer automated acoustic equalization and alignment for any
reproduction system from simple stereo to very complex
3D immersive audio setups including also one or more
subwoofers. GLM setup is fast and accurate. The settings can
be controlled with a computer or be permanently stored in the
monitors to make the setup available at all times even when
a computer is not in use. Genelec recommends setting up
SAM monitoring systems using GLM. You can find a detailed
description of the setup and the use of GLM™ in the GLM™
System Operating Manual.
The setup is fast and consists of the following steps:
•  Connect a CAT5 (RJ45) cable between each monitor (and
subwoofer) and finally to the control network input of the
GLM Adapter device (see Figure 1).
•  Connect the GLM Adapter device to computer USB
connector.
•  Using a microphone stand, place the Genelec measurement
microphone at the listening location with the microphone
pointing upwards and the microphone top at the height of the
engineer’s ear. The microphone is a part of the GLM User Kit.
•  Connect the microphone cable to the microphone input in
the GLM Adapter device.
•  Download the GLM software at the Genelec web site (www.
genelec.com).
•  Install the GLM software and follow the instructions in the
software to measure and set up your monitors.
•  If you plan to not use a computer for controlling the
monitors, use the GLM software to write the setting into the
monitors (use menu item “Store | Store the Current Group
Settings…”).
While the GLM network is disconnected the settings stored
using the Genelec Loudspeaker Manager software can be
selected in use by setting the STORED switch ON.
Setup without using the GLM
When GLM is not available, you can use the settings on the
monitor for system setup. These settings are limited but provide
the basic acoustical calibrations and input selection. To use this
method, set the STORED switch OFF.
Connect the MAINS INPUT to the mains supply. These
products support any mains voltage globally (100-240 VAC,
50-60 Hz) so they can be plugged in anywhere. If the mains
power is provided with a generator, inverter or certain lower-
quality UPS devices, we recommend filtering of the mains
power voltage harmonics and taking care that the voltage
supply is stable.
The ANALOG IN connector is used for analog audio signals. The
maximum input level is +25 dBu. These monitors produce 100
dB SPL sound level at 1 meter in free space for an analogue
input signal of -6 dBu.
The DIGITAL IN AES/EBU female XLR connector is for AES/
EBU formatted digital audio input signals. This input is selected
automatically when a valid digital audio signal is present.
Analog input is selected when the AES/EBU signal input is
disconnected. The AES/EBU input supports two channels in a
single cable). When the digital source device controls the digital
output level, it may be advantageous to lower the level on the
monitor’s controls, which will enable the use of a higher digital
signal level with more digital resolution. With digital inputs the
audio is referenced to 0 dBFS (dB relative to the digital full scale,
the largest level that can be represented in the AES/EBU signal).
LISTENING
POSITION
MICROPHONE
GLM
NETWORK
GLM
NETWORK
GLM
NETWORK
USB
Figure 1. GLM control network cabling

Produkt Specifikationer

Mærke: Genelec
Kategori: Højttaler
Model: 8350APM

Har du brug for hjælp?

Hvis du har brug for hjælp til Genelec 8350APM stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler Genelec Manualer

Genelec

Genelec 8381A Manual

15 November 2024
Genelec

Genelec 8010 APM Manual

30 September 2024
Genelec

Genelec 8020D Manual

27 September 2024
Genelec

Genelec 8020B Manual

9 September 2024
Genelec

Genelec 3440A Manual

5 September 2024
Genelec

Genelec 8010 AW Manual

10 August 2024
Genelec

Genelec 8040A Manual

9 August 2024
Genelec

Genelec 8050B Manual

8 August 2024
Genelec

Genelec 8050A Manual

4 August 2024
Genelec

Genelec 8320AWM Manual

4 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Earthquake Sound

Earthquake Sound PR-EQ5S8 Manual

17 Juni 2025
Sogo

Sogo SS-8780 Manual

17 Juni 2025
DS18

DS18 PRO-X6.4BMRGB Manual

17 Juni 2025
DS18

DS18 PRO-X4.4BMSL Manual

17 Juni 2025
DS18

DS18 PRO-FU12.8 Manual

17 Juni 2025
DS18

DS18 GEN-X G4.6Xi Manual

17 Juni 2025
DS18

DS18 JL-SBAR.HT Manual

17 Juni 2025
DS18

DS18 JK-SBAR22 Manual

17 Juni 2025
DS18

DS18 JK-SBAR.HT Manual

17 Juni 2025
Hama

Hama Speaker Stand 220882 Manual

17 Juni 2025