Genelec G Three Manual

Genelec Højttaler G Three

Læs gratis den danske manual til Genelec G Three (16 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Genelec G Three, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
Operating Manual
Käyttöohje
操作手册
G Three
G Four
G Five
General description
Genelec G Three, G Four and G Five are two
way active loudspeakers designed to produce
broad bandwidth sound with high output and
low coloration.
Positioning the loudspeaker
Each loudspeaker is supplied with a
built-in amplifier unit, mains cable and an
operating manual. After unpacking, place
the loudspeakers in their required listening
positions, pointing them to the center of the
listening area. If possible, place the listening
position along the middle axis of the room and
the loudspeakers at equal distance from the
side walls.
Connections
Before connecting up, ensure that the power
switches on the loudspeakers and the signal
source are set to OFF. The power switch is
located on the back panel of the loudspeaker.
Do not connect the loudspeaker to an
unearthed mains supply or using an unearthed
mains cable.
Audio input is via a 10 kOhm balanced
female XLR connector or unbalanced RCA
connector. Only line level audio signal from a
preamplier, computer sound card or similar
signal source can be connected, never a high
power signal from the speaker terminals of a
power amplier. It is possible to connect two
audio sources to the loudspeakers at the same
time using both connectors, as long as only
one source is used at a time.
Once the connections have been made, the
loudspeakers are ready to be switched on.
ISS Autostart function
Genelec G Three, G Four and G Five a have
a power switch on the back panel. Set this
switch to “OFF” when the loudspeakers are left
unused for several days or when connecting or
disconnecting any cables in the system.
When the switch is set to “ON”, the
signal sensing ISS Autostart function of the
loudspeakers powers them up when playback
begins. Automatic powering down of the
loudspeakers happens one hour after the
playback has ended and the loudspeakers
go to standby mode. The power consumption
in standby mode is less than 0.5 watts. The
loudspeaker will automatically and rapidly
start once an input signal is detected from the
source.
Model G Three has a switch that can be
used to activate or deactivate the ISS function.
Setting the playback level
The playback level of the loudspeakers has
two basic settings, normal and +10 dB on the
G Four and Five and normal and -10 dB on G
Three. The normal setting is factory default and
the +10 or -10 dB setting can be selected by
turning the corresponding switch on the back
panel to “ON”. This adjustment is used for
matching the loudspeaker to the signal source
so that it plays at a convenient volume.
Switching off the power
indicator LED
The power indicator LED can be switched off
by turning the “LED OFF” switch on the back
panel to “ON”.

Produkt Specifikationer

Mærke: Genelec
Kategori: Højttaler
Model: G Three

Har du brug for hjælp?

Hvis du har brug for hjælp til Genelec G Three stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler Genelec Manualer

Genelec

Genelec 8381A Manual

15 November 2024
Genelec

Genelec 8010 APM Manual

30 September 2024
Genelec

Genelec 8020D Manual

27 September 2024
Genelec

Genelec 8020B Manual

9 September 2024
Genelec

Genelec 3440A Manual

5 September 2024
Genelec

Genelec 8010 AW Manual

10 August 2024
Genelec

Genelec 8040A Manual

9 August 2024
Genelec

Genelec 8050B Manual

8 August 2024
Genelec

Genelec 8050A Manual

4 August 2024
Genelec

Genelec 8320AWM Manual

4 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Sogo

Sogo SS-8790 Manual

17 Juni 2025
DS18

DS18 Hydro NXL-8M Manual

17 Juni 2025
Earthquake Sound

Earthquake Sound PR-EQ5S8 Manual

17 Juni 2025
Sogo

Sogo SS-8780 Manual

17 Juni 2025
DS18

DS18 PRO-X6.4BMRGB Manual

17 Juni 2025
DS18

DS18 PRO-X4.4BMSL Manual

17 Juni 2025
DS18

DS18 PRO-FU12.8 Manual

17 Juni 2025
DS18

DS18 GEN-X G4.6Xi Manual

17 Juni 2025
DS18

DS18 JL-SBAR.HT Manual

17 Juni 2025
DS18

DS18 JK-SBAR22 Manual

17 Juni 2025