Genesis GCOT335 Manual

Genesis savemaskine GCOT335

Læs gratis den danske manual til Genesis GCOT335 (13 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Genesis GCOT335, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/13
3” High-Speed Electric Cut-Off Tool
Tronçonneuse à métaux électrique haute vitesse de 7,6 cm
Herramienta eléctrica de corte de alta velocidad, de 3”
GCOT335
Operator’s Manual
Manuel d’utilisation
Manual del Operario
888-552-8665
TOLL FREE
HELP LINE:
WEBSITE: www.genesispowertools.com
English
3” Electric Cut-off Tool
Operator’s Manual GCOT335
SPECIFICATIONS
• Model: ------------------------- GCOT335
• Rated Power: ----------------- 120V~/60Hz, 3.5 Amp
• No Load Speed: --------------- 24,000 RPM
• Disc Size: --------------------- 3” (76mm)
• Max Cutting Depth: ----------- 1" (25mm)
• Net Weight: ------------------- 3.2 lbs
Includes: 3” Cut-off Disc, Arbor Wrench and Hex key
WARNING: To reduce the risk of injury, user must read and understand this
operator’s manual before operating this tool. Save this Manual for future reference.
Toll-Free Help Line: 1-888-552-8665
WARNING: The Operation of any power tool can result in foreign
objects being thrown into your eyes, which can result in severe eye damage.
Before beginning tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with side
shields. Always wear eye protection which is marked to comply with ANSI Z87.1.
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.
GENERAL SAFETY RULES
WARNING: Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles .
WARNING: Read and understand all warnings, cautions and operating
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
• Cluttered benches and dark areas invite accidents.Keep your work area clean and well lit.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.
WEAR YOUR
FORESIGHT IS BETTER
THAN NO SIGHT
SAFETY GLASSES

Produkt Specifikationer

Mærke: Genesis
Kategori: savemaskine
Model: GCOT335

Har du brug for hjælp?

Hvis du har brug for hjælp til Genesis GCOT335 stil et spørgsmål nedenfor, og andre brugere vil svare dig


savemaskine Genesis Manualer

Genesis

Genesis GRS750 Manual

14 August 2024
Genesis

Genesis GCOT335 Manual

10 August 2024
Genesis

Genesis GJS500 Manual

5 August 2024
Genesis

Genesis GCS130 Manual

24 Juli 2024
Genesis

Genesis GTS10SC Manual

24 Juli 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell

Einhell GE-CS 18 Li Manual

15 Oktober 2024
MSW

MSW -TAS287 Manual

15 Oktober 2024
MSW

MSW T-SAW300 Manual

15 Oktober 2024
Makita

Makita 5603 Manual

14 Oktober 2024
FERM

FERM FKS-165 Manual

13 Oktober 2024
Einhell

Einhell TC-AP 650 E Manual

12 Oktober 2024
Einhell

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024
Einhell

Einhell BT-SM 2534 Manual

11 Oktober 2024
Hitachi

Hitachi C 7MFA(LA) Manual

9 Oktober 2024
Ozito

Ozito ECS-406A Manual

6 Oktober 2024