Genesis GDP1005A Manual

Genesis Boremaskine GDP1005A

Læs gratis den danske manual til Genesis GDP1005A (14 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Genesis GDP1005A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/14

10" 5-Speed Drill Press

Perceuse à colonne de 10 po., 5 vitesses

Taladro de pie de 10”, 5 velocidades

GDP1005A

Operator’s Manual

Manuel d’utilisation

Manual del operario

888-552-8665

TOLL FREE

HELP LINE:

WEBSITE: www.genesispowertools.com

English

10" Drill Press

Operator’s Manual GDP1005A

SPECIFICATIONS

• Model: -------------------------------- GDP1005A

• Rated Power: ------------------------- 120V~ /60 Hz, 4.1 Amp

• No Load Speed: ----------------------- 5 Speeds (620, 1150, 1630, 2180, 3070 RPM)

• Chuck Size: --------------------------- 5/8” (16mm)

• Spindle Travel: ------------------------ 2” (50mm)

• Swing: -------------------------------- 10” (254mm)

• Table Movement:---------------------- 45° bevel, 360° swivel

• Table Size: ---------------------------- 7-1/4” x 7-1/4” (184mm x 184mm)

• Base Size: ---------------------------- 13-3/8” x 8-1/4” (340mm x 210mm)

• Max. Distance from Spindle End to Surface of Table:-------- 12-3/16” (310mm)

• Max Distance from Spindle End to Surface of Base: --------- 17-1/4” (438mm)

• Max Distance from Spindle Axis to Surface of Column: ----- 5 ” (127mm)

• Net Weight: ------------------------------------------------- 49.5 Lbs

Includes: Chuck Key, 2 Allen Wrenches and 2 “AAA” Batteries for Work Light

WARNING: To reduce the risk of injury, user must read and understand this

operator’s manual before operating this tool. Save this Manual for future reference.

Toll-Free Help Line: 1-888-552-8665

WARNING: The operation of any power tool can result in foreign objects

being thrown into your eyes, which can result in severe eye damage. Before beginning

tool operation, always wear safety goggles or safety glasses with side shields and a

full face shield when needed. We recommend Wide Vision Safety Mask for use over

eyeglasses or standard safety glasses with side shields. Always wear eye protection

which is marked to comply with ANSI Z87.1.

Look for this symbol to point out important safety

precautions. It means attention!! Your safety is involved.

GENERAL SAFETY RULES

WARNING: Some dust created by power sanding, sawing, grinding, drilling,

and other construction activities contains chemicals known to cause cancer, birth

defects or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints,

• Crystalline silica from bricks and cement and other masonry products, and

• Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as

those dust masks that are specially designed to ﬁlter out microscopic particles

WARNING: Read and understand all warnings, cautions and operating

instructions before using this equipment. Failure to follow all instructions listed below

may result in electric shock, ﬁre and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA SAFETY

• Cluttered benches and dark areas invite accidents.Keep your work area clean and well lit.

WEAR YOUR

FORESIGHT IS BETTER

THAN NO SIGHT

SAFETY GLASSES

Produkt Specifikationer

Mærke:	Genesis
Kategori:	Boremaskine
Model:	GDP1005A

Har du brug for hjælp?

Hvis du har brug for hjælp til Genesis GDP1005A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Boremaskine Genesis Manualer

Genesis GDP1005A Manual

1 December 2023

Genesis GSHD1290 Manual

25 Juni 2023

Genesis GLID20A Manual

21 Juni 2023

Boremaskine Manualer

Nyeste Boremaskine Manualer

Milwaukee M18 2615-20 Manual

13 August 2025

Milwaukee M18 Fuel 2904-20 Manual

13 August 2025

Milwaukee M18 Fuel 2903-20 Manual

13 August 2025

Milwaukee M18 2607-20 Manual

13 August 2025

Milwaukee M18 Fuel Super Hawg 2811-20 Manual

13 August 2025

Bosch GBH 18 V-26 Manual

13 August 2025

Milwaukee M18 2801-20 Manual

13 August 2025

Milwaukee M12 Fuel 3404 Manual

13 August 2025

Milwaukee M18 Fuel Super Hawg 2809-20 Manual

13 August 2025

Milwaukee M18 Fuel 2807-20 Manual

12 August 2025