Gigabyte AORUS RGB SLI HB Bridge Manual

Gigabyte Bundkort AORUS RGB SLI HB Bridge

Læs gratis den danske manual til Gigabyte AORUS RGB SLI HB Bridge (4 sider) i kategorien Bundkort. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Gigabyte AORUS RGB SLI HB Bridge, eller vil du spørge andre brugere om produktet?

Side 1/4
AORUS RGB SLI HB Bridge
Installation Guide/
Hardware Installation/硬體安裝
5-pin LED_C header cable x 1/5-pin LED_C x 1AORUS RGB SLI HB Bridge 插座連接線
Steps:
Attach the AORUS RGB SLI HB Bridge to the SLI connectors
of the two graphics cards as shown. Please note the
orientation of the bridge from the image on the left.
將 依圖示安裝至AORUS RGB SLI HB Bridge 2示卡
方的SLI金手部份請注安裝方
2-Way SLI Bridge
A 5-pin LED_C header cable included
Compatible with NVIDIA® GeForce GTX 1070 and 1080 series graphics cards
1 slot PCIe spacing
AORUS Logo LED illumination
2-Way SLI 橋接器
內附一條 插座連接線5-pin LED_C
支援 NVIDIA® GeForce GTX 1070 1080 及 系列顯示卡
1 slot PCIe 間距
AORUS Logo LED 亮燈顯示
Product Speci cations/規格
12WE6-ARSLIBR-10AR
按鈕 功能說
能切換鈕
(5)
亮模""/"一個"按鈕切換 種顏20
亮度調整""/"少 按鈕切" 10亮度
爍模式"一個"/"一個 按鈕切換 種閃效果 次閃" 5 --
呼吸所有色流輪
步模主機板上的 燈色彩LED /( )
LED
一個/加鈕 亮 閃爍模時可切換/ /爍效果亮度調整模式時可亮度
一個/ 亮 閃爍模時可切換/ /爍效果亮度調整模式時可亮度
A. Controlling the lighting effects with the buttons on the bridge
A. 使橋接器按鈕控制 顯示LED
Steps:
Enter the operating system and enable SLI mode with the NVIDIA® Control Panel, and you are ready to use
the three buttons on the SLI bridge to control the lighting effects of the LEDs on the bridge.
請進使用NVIDIA®面板啟動SLI使橋接上的按鈕控制橋接器燈號
Button Description
Options Button
(Toggles between 5
functions)
Static mode: Use the "Next" or "Previous" button to switch between 20 colors.
Brightness adjustment: Use the "Add" or "Minus" button to switch between 10
levels of brightness.
• fl Flash mode: Use the "Next" or "Previous" button to switch between 5 ashing
effects: Single Flash, Double Flash, Breath, Cycling through all colors,
Random
Sync mode: Sync the br idge LED c olor and activit y with t hat of the
motherboard's integrated LEDs. (Note)
Turn the LEDs off.
Next/Add Button Change the bridge LED color (Static mode), switch ashing effects (Flash mode),
or increase brightness.
Previous/Minus Button Change the bridge LED color (Static mode), switch ashing effects (Flash mode),
or decrease brightness.
Previous/Minus button
一個/
Next/Add button
一個/加鈕
Options button
要功切換鈕
(Note) The Sync mode is only supported when working with the GIGABYTE RGB Fusion application (see next page).
( ) 註 同步模式只在使用 用程式時才能支RGB Rusion (下頁)
There are two ways to control the lighting effects of the LEDs on the bridge:
使用來控制橋接器的 顯示模LED


Produkt Specifikationer

Mærke: Gigabyte
Kategori: Bundkort
Model: AORUS RGB SLI HB Bridge

Har du brug for hjælp?

Hvis du har brug for hjælp til Gigabyte AORUS RGB SLI HB Bridge stil et spørgsmål nedenfor, og andre brugere vil svare dig