Godox SK400II Manual

Godox lampe SK400II

Læs gratis den danske manual til Godox SK400II (6 sider) i kategorien lampe. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Godox SK400II, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Compact Studio Flash

705-SK2000-00 Made In China 说明手册

Instruction Manual

中英文双语

Chinese English Bilingual

影室闪光灯

地址/ 深圳市宝安区福海街道塘尾社区耀川工业区厂房栋层至层、栋层至层Add: 2 1 4 4 1 4

1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone,

Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China

电话/Tel: +86-755-29609320(8062) Fax: +86-755-25723423 传真/

邮箱/ E-mail: godox@godox.com http://www.godox.com

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

FOREWORD

Thanks for choosing SKII series studio flash. It is a lightweight, compact and

durable flash with complete functions. Design for shooting studio portrait and

e-commerce product. This product is suitable for head shot, waist shoot, and

certificate photography, as well as product shooting, etc. It can also offer high

light, background light, or hair light in large studios and workshops. The SKII

flash offers:

CONTENTS

14 • Slave Trigger Model

15 • Buzz Function

15 • Key Combination

15 • Alarm Display

15 • Memory Function

15 • Wireless Control Function

17 • Tube Replacement

17 Technical Data

18 Maintenance

Built-in Godox 2.4G wireless X system

Precise output displayed on LCD panel, 40 steps from 1/16 to 1/1 (or 6.0 to 10.0)

Use optional X1, XT16 or FT-16 trigger to control the flash power ratio, modeling

lamp and buzzer, as well as flash triggering

Compact and lightweight body with Bowens mount to add almost any studio light

shapers

150W modeling lamp adjusts in 5% to 100% power levels

Outstanding output stability, no more than 2% shifts when under the same output

Anti-preflash function enables synchronization with cameras that have a one-

preflash firing system

Auto memory and recovery of adjusted panel settings

09 Foreword

10 Warning

Caution10

Names of Parts11

11 • Body

12 • LCD Panel

12 • Accessories

12 • Separately Sold Accessories

13 Operations

13 • Flash Preparation

13 • Power Connection

13 • Modeling Lamp

14 • Power Output Control

14 • Test Button

14 • Sync Triggering

14 • GR/CH Button

To prevent damage to the product or injury to you or to others, read the

following warnings in their entirety before using this product. Keep these

safety instructions where users can read them for ready reference.

Do not disassemble or modify. Should the product break down, send the

defective back to the authorized service center for inspection and maintenance.

Keep dry. Do not handle with wet hands, immerse in water, or expose to rain.

Keep out of reach of children.

Please put the device in a ventilation environment and keep the parts of lighting

and heat dissipation holes are unobstructed. Do not use in flammable

environment.

As this product adopts make and break device, please keep it easy to be used.

No touching the heating parts of this product.

Please turn off the power and wear insulated gloves before installing and

connecting accessories. When replacing the tube or modeling lamp, please

make sure that the tube is cool and wear insulated gloves to prevent burns.

Do not flash directly towards naked eyes (especially those of babies), otherwise

it may lead to visual impairment.

Disconnect from the power supply when it will not be used for an extended

period.

For continued protection against risk of fire replace only with same Type F8AL

250V fuse.

An apparatus with CLASS I construction shall be connected to a MAINS socket

outlet with a protective earthing connection.

The MAINS plug or an appliance coupler is used as the disconnect device, the

disconnect device shall remain readily operable.

After 30 continuous flashes at full power, the flash should be cooled down for

about 3 minutes. Overheating will occur if it is used continuously without cooling

down.

Do not keep using the modeling lamp for a long time; otherwise flammable

accessories attaching to flash head, e.g. softbox will get burnt. A 10-minute time

is recommended in this case. After 10 minutes, cool it down for 1 minute.

When using a snoot, do not keep the modeling lamp on for a long time or fire too

frequently (not over six times for one minute). Overheating will result in damages

for strobe housing and/or studio light.

Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.

The apparatus shall not be exposed to tripping or splashing and that no objects

filled with liquids, such as vases, shall be placed on the apparatus.

Do not touch the area around this symbol since it is hot.

Warning

- 09 - - 10 -

Produkt Specifikationer

Mærke:	Godox
Kategori:	lampe
Model:	SK400II

Har du brug for hjælp?

Hvis du har brug for hjælp til Godox SK400II stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

lampe Godox Manualer

Godox Knowled MG2400Bi SE Manual

10 Marts 2025

Godox M600Bi Pro Manual

4 December 2024

Godox Knowled F100R Manual

4 December 2024

3 Oktober 2024

28 September 2024

22 September 2024

17 September 2024

7 September 2024

Godox P260C Pro Manual

5 September 2024

Godox M600R Manual

2 September 2024

lampe Manualer

Nyeste lampe Manualer

NUVO Arabel 60/6967 Manual

4 April 2025

NUVO Gotham 60/191 Manual

4 April 2025

NUVO Cordello 60/7884 Manual

4 April 2025

NUVO Clarksville 60/8061 Manual

4 April 2025

NUVO Gotham 60/190 Manual

4 April 2025

Integral LED ILSTRGBWB028E Manual

4 April 2025

Trust Shyne 25483 Manual

3 April 2025

Trust Vybz GXT 904 Manual

3 April 2025

Schonbek Priscilla BC7106N-48PBZ Manual

2 April 2025

Bresser BR-7RGB Mini Tube Manual

2 April 2025