Grothe 1068/021 Manual

Grothe Detektor 1068/021

Læs gratis den danske manual til Grothe 1068/021 (12 sider) i kategorien Detektor. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Grothe 1068/021, eller vil du spørge andre brugere om produktet?

Side 1/12
DS106 00 206428- 8A LBT
LCD COMMAND KEYPAD
CLAVIER DE COMMANDE LCD
STEUERTASTATUR LCD
Ref. 8/ 1106 02
Through the following QR Code, it is possible to download the eventual new version of the booklet in
English, French and German l .anguage
http://qrcode.urmet.com/default.aspx?prodUrmet=141753&lingua=en
INSTRUCTION MANUAL
LIVRET D'INSTRUCTIONS
BEDIENUNGSANLEITUNG
Mod.
1068
2 8- 8A DS106 00
ENGLISH
GENERAL DESCRIPTION
The 1068/021 indoor display keypad, used to control and program the 1068 serie system is equipped with : s
LCD backlit display with contrast and luminosity regulation;
3 LED to signal the system status (Power supply, Recommendations Zone status , );
18 -protected alphanumerical keys; door
buzzer with adjustable volume;
1 programmable i . nput
A tamper jumper is supplied with the product to bypass the keypad opening/removal button. Use of this
feature will cancel EN50131 certication.
The keypad is powered by the bus that connects it to the control panel.
WARNING! In this document there are only present some essential indications about product.
For further and more detailed information, refer to manuals concerning 1068 series control panels.
POSITIONING
Keypad must be positioned:
in an environment that is sheltered and protected from water and humidity;
on a dry and level wall;
in the vicinity of the accesses to area to be protected;
in an inner location which is not subjected to excessive sudden
rises/falls in temperature, and is protected by anti-burglar system at ;
160 cm height for normal installations. For disabled or special needs
users of the D1 type (elderly) and D2 type (lower limb motor
diculties), must be arranged at a height comprised between 75 cm and 140 the centre of the device
cm with respect to the oor. For more details, see technical standard CEI 64-21:2016- Residential 12
environments. Systems suited for use by people with disabilities or special needs.
KEYPAD OPENING
Use a slotted screwdriver to open the keypad by gently pressing the point indicated in the image in order to
disengage the closure spur and lift the cover (Fig. 1).
INSTALLAT ION
For running the cables, open the provided hole on the bottom of the keypad ( Fig. 2). Otherwise, the D -
scored holes for the cable ducts can be used ( Fig. 2). E -
Secure the keypad bottom to the wall by means of 6 mm plugs ( Fig. 2 - not provided). During xing A/B -
always use also the hole ( Fig. 2) for the protection against removal. C -
If bottom is fastened over round or rectangular a 3-place built-in box (e.g. BTICINO 503), use holes (A or B)
and suitable screws.
WARNING! before xing, verify the bottom direction: cover closing hook shall be positioned at the
bottom.
For easier wiring, it is advisable to strip the cable as far as the access hole.
Fig. 1


Produkt Specifikationer

Mærke: Grothe
Kategori: Detektor
Model: 1068/021

Har du brug for hjælp?

Hvis du har brug for hjælp til Grothe 1068/021 stil et spørgsmål nedenfor, og andre brugere vil svare dig