GYS pot 32 D.X Complete Manual

GYS Ikke kategoriseret pot 32 D.X Complete

Læs gratis den danske manual til GYS pot 32 D.X Complete (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 14 anmeldelser. Har du et spørgsmål om GYS pot 32 D.X Complete, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

INSTRUCTION MANUAL

FOR SPOT WELDING

MACHINES

GYSPOT 32D .C

GYSPOT 32D.X

GYS

Last update:

23/01/2019

Version : V5

Congratulations for the selection of this product which has been designed with great care ; Before installing and

using the product, please read carefully the following recommendations of safety in order to avoid accidents to

the users and damages of the welding process.

GYS can’t be responsible for the damages occurred to persons or things, which derive from the use of the

machine in following circumstances:

- Modification or neutralization of safety elements

- Non respect of the recommendations written in the manual instruction.

- Modification of the characteristics on the product

- Use of the accessories, which are different from the ones delivered by GYS.

I / PRESENTATION

This product has been designed to carry out the following operations in car body workshop:

- Spot welding machine on sheet metals with pneumatic pliers (except GYSPOT P230, P400),

- Welding of sheet metals with gun

- Welding of nails, rivets, discs and pins.

- Suppression of bumps and impacts ( impact of hail with the option “quick repair”).

II / SAFETY STANDARDS AND GENERAL PRECAUTIONS

GENERALITIES

1. Before disassembling the product’s body, plug out the lead cable.

2. The operators must have the appropriate qualification.

3. The operations of servicing can only be controlled by qualified technicians.

4. The operator is responsible for respect of the car manufacturers recommendations, concerning the protection

of electrical and electronic procedures ( car computer, car radio, alarm, air bag, etc…)

5. Before an operation of servicing, the power supply with compressed air must be cut off and off loaded.

6. The electrodes, arms, and the other secondary conductors can reach a very high temperature and remain hot

very long after having stopped the machine. Be careful: high risk of burns.

7. It is necessary to make a regular preventive maintenance.

ELECTRICITY

1. Check that the unity must be connected to the earth coupler and that the connection to the earth is in good

condition.

2. Check that the work bench is connected to the earth coupler.

3. Make sure that the operator has no contact with the metal parts to be welded without any protection or with

wet clothes.

4. Avoid to be in contact with the welding part.

5. Don’t make spot welding operations in very wet areas or on a wet floor.

6. Don’t weld with worn out cables. Check that there is no default with the isolation with stripped cables or with

loose connections.

7. Switch off the unit before replacing the electrodes..

8. Before controlling or repairing, please disconnect the unit directly to the level of the plug.

PROTECTION OF EYES AND BODY

1. During the welding process, the process must be protected from the eventual flashes of the electrical arc with

protection clothes like leather gloves, welding aprons, safety shoes, welding helmets or glasses for filtering

radiations and projections. As well during operations of rubbing and hammering, the operator must protect his

eyes.

2. The force of tightening of the clamp can reach 500 N. Keep away all body parts from the mobile elements da

to avoid risks of tightening.

3. Don’t keep rings, watches, or jewellery, which are current lead and can create burns.

4. All the protection board must be in good condition and maintained in place.

Protect the environment near the product against projections and reflections.

Produkt Specifikationer

Mærke:	GYS
Kategori:	Ikke kategoriseret
Model:	pot 32 D.X Complete

Har du brug for hjælp?

Hvis du har brug for hjælp til GYS pot 32 D.X Complete stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret GYS Manualer

GYS flash 125.12 CNT FV Manual

29 August 2025

GYS flash 101.12 CNT FV Manual

9 August 2025

GYS VAS 821 005 80 023 Manual

9 August 2025

GYS flash 53.24 CNT FV Manual

8 August 2025

5 August 2025

7 Juli 2025

6 Juli 2025

6 Juli 2025

GYS flash 148.12 CNT FV Manual

6 Juli 2025

GYS Nomad Power 501 Manual

6 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

IFM SU9030 Manual

13 September 2025

IFM O2U554 Manual

13 September 2025

Speco Technologies HTi70TM Manual

13 September 2025

QSC RMXa Manual

13 September 2025

Tineco Floor One S2 Series Manual

13 September 2025

Tineco Floor One S3 Breeze Manual

13 September 2025

Tineco Floor One S5 Steam Manual

13 September 2025

Osram VX500-CB Manual

13 September 2025

Zelmer ZTS7990 Manual

13 September 2025

Osram VX250-SP Manual

13 September 2025