Hager WBSP2SUSBAC Manual

Hager Vægudtag WBSP2SUSBAC

Læs gratis den danske manual til Hager WBSP2SUSBAC (2 sider) i kategorien Vægudtag. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Hager WBSP2SUSBAC, eller vil du spørge andre brugere om produktet?

Side 1/2
Rotoloc USB charger
User Instructions
1 WIS0090
WIS0090
Customer service
P 1300 850 253
F 1300 424 372
E customerservice@hagerelectro.com.au
W www.hagerelectro.com.au
USB connectable devices
and audio players.
Installation instructions
1 - Fit USB module into Rotoloc
compatible plate.
2 - Connect Brown (Active) and Blue (Neutral)
cables to corresponding A&N 240V supply.
3 - Fix transformer via cable tie if required.
4 - Fit plate to wall.
Warnings for safe use
This product must be installed
by a licensed electrician.
For indoor use only.
This product contains no serviceable
parts and no attempt should be
made to repair the product.
Ensure transformer is clear
of any wall insulation.
210mm
148.5mm
WBMUSB-xx
WBMUSBAC-xx
Technical specifications
USB Input 230-240V ~ 50Hz 300mA
USB Output
5.0V 4.2A max,
21.0W
Type A: 2.4A max;
Type C: 3.0A max
Efficiency level VI
Average Active
Efficiency
83.5%
Efficiency at low
load (10%)
79.0%
No-load power
consumption
100mW
Overload
protection
on output
4.6 ±
±
±
±± 0.3A
Test standards
IEC62368-1
CISPR32
Wall cavity 50mm min
Hager Electro Pty. Ltd. - Unit 17/2-8 Power Street Rydalmere NSW 2116 - Tel. 1300 850 253 - Fax. 1300 424 372 - www.hagerelectro.com.au
2 WIS0090
210mm
148.5mm
Fits into any Rotoloc compatible
plate or socket.
Cable tie transformer to
on USB mechanism
Connect to mains supply
A = brown, N = blue


Produkt Specifikationer

Mærke: Hager
Kategori: Vægudtag
Model: WBSP2SUSBAC

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager WBSP2SUSBAC stil et spørgsmål nedenfor, og andre brugere vil svare dig