Hager WBWSV2 Manual

Hager Vægudtag WBWSV2

Læs gratis den danske manual til Hager WBWSV2 (1 sider) i kategorien Vægudtag. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Hager WBWSV2, eller vil du spørge andre brugere om produktet?

Side 1/1
Hager Electro Pty. Ltd. - Unit 1/170 Power Street Glendenning NSW 2761 - Tel. 1300 850 253 - Fax. 1300 424 372 - www.hagerelectro.com.au
WIS0007C10
WIS0007C10
WBWSXX
117
77 25
Specifications
Rating - 10A, 240V
IP rating - 66
Installation Instructions
All hagerblu IP rated switches MUST be installed as per manufacturers
instructions to maintain the integrity of the IP rating
When mounting the switch, ensure the surface is:
- Smooth & flat
- Free of dust or grime
- Must be non porous
Ensure there are no gaps between the sealing gasket and the wall surface.
If fitting to a wall box or stud mounting bracket do not use any other
screws than the screws provided with the fitted ‘O’ ring.
Ensure the stud mounting brackets or boxes are below the surface.
If fitting to a solid wall using the alternative mounting holes, place the
bungs provided in the standard 84mm mounting holes.
Failure to follow the manufacturers instructions will void any warranty offer.


Produkt Specifikationer

Mærke: Hager
Kategori: Vægudtag
Model: WBWSV2

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager WBWSV2 stil et spørgsmål nedenfor, og andre brugere vil svare dig