PLUG-IN ROOM TEMPERATURE CONTROLLER
Thank you for choosing THERMOSTAT. This programmable electronic temperature controller will provide
you with comfortable home environment and will help you to save energy.
Plug THERMOSTAT into power point. Press Power button once a display showing current ROOM –
temperature and SET temperature will come up. By pressing Up or Down buttons select your desired SET
temperature. Plug your heater into Heatermate. If child lock is activated press/hold Down button for 3
seconds then release to unlock.
Short press to switch between manual and automatic control
Press/hold for 3 seconds then release to enter into set clock and timer mode.
Light is ON -- power to heater is ON; light is OFF power to heater is OFF. --
DISPLAY SYMBLES EXPLAINED:
Automatic control mode (manual control is not showing) “ ”
Manual control mode (automatic control is not showing) “ ”
Heating mode; “ ” is displayed when power to heater is ON
Cooling mode; “ ” is displayed when power to air conditioner or fan is ON
6 periods programmable icon
Child lock: activated automatically after 10 minutes of inactivity. Press/hold Down button
“ ”for 3 seconds then release to unlock. Repeat the same procedure to lock.
Ventilation mode turns heater o for a period of time during room ventilation (opening –
windows) when room temperature drops below a specied temperature.
SETTING UP CLOCK AND TIMER:
Press/hold “ ” for 3 seconds then release to enter into setting screen (as above) - ashing. P“ ” icon is ress “ ”
to enter into clock setting mode which displays minute, hour and day of the week. Minute is ashing. P ress “ ” or “ ”
to adjust value. Press “ ” to conrm and switch to hour and day of the week. Press “ ” or “ ” to adjust their values.
Press “ ” button to save all clock settings and return to previous screen.
Press/hold “ ” for 3 seconds then release to enter into setting screen. Press“ ”to choose“ ”( will ash) to set
time of timer switch ON time. P to adjust value. Press to choose and set tim switch OFF ress “ ” or “ ” “ ” “ ” er
time Press to save. cancel tim function press to set both and times . “ ” To er ” ” to 00:00.
