Hikoki C7YA Manual

Hikoki savemaskine C7YA

Læs gratis den danske manual til Hikoki C7YA (13 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Hikoki C7YA, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/13
Dust Collection Circular Saw
MODEL C 7YA
HANDLING INSTRUCTIONS
Note:
Before using this Power Tool, carefully read through these HANDLING INSTRUCTIONS
to ensure effi cient, safe operation. It is recommended that these INSTRUCTIONS be
kept readily available as an important reference when using this power tool.
2
SYMBOLS
When symbols are used on the machine, refer to the followings to understand the meaning.
V ................................................................................volts
A ......................................................................... amperes
Hz ............................................................................. hertz
W ..............................................................................watts
kW .......................................................................kilowatts
g.............................................................................. grams
kg .......................................................................kilograms
min ........................................................................minutes
s ...........................................................................seconds
n0 ................................................................no-load speed
.../min or ...min-1
...
Revolutions or reciprocations per minute
or d.c. .................................................... direct current
or a.c. .............................................. Alternating current
.....................................................................class ll tool
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the infl uence of drugs, alcohol or
medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off -position before connecting to
power source and/or battery pack, picking up or
carrying the tool.
Carrying power tools with your fi nger on the switch or
energising power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of dust collection can reduce dust related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off .
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.

Produkt Specifikationer

Mærke: Hikoki
Kategori: savemaskine
Model: C7YA

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikoki C7YA stil et spørgsmål nedenfor, og andre brugere vil svare dig


savemaskine Hikoki Manualer

Hikoki

Hikoki C8FSE Manual

31 August 2024
Hikoki

Hikoki CJ160VA Manual

28 August 2024
Hikoki

Hikoki C10FCE2 Manual

25 August 2024
Hikoki

Hikoki M 12SA2 Manual

25 August 2024
Hikoki

Hikoki C1806DB Manual

25 August 2024
Hikoki

Hikoki C 3606DPA Manual

25 August 2024
Hikoki

Hikoki M 12V2 Manual

25 August 2024
Hikoki

Hikoki C 10FCE2 Manual

25 August 2024
Hikoki

Hikoki C3610DRJ Manual

25 August 2024
Hikoki

Hikoki C7YA Manual

23 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell

Einhell GE-CS 18 Li Manual

15 Oktober 2024
MSW

MSW -TAS287 Manual

15 Oktober 2024
MSW

MSW T-SAW300 Manual

15 Oktober 2024
Makita

Makita 5603 Manual

14 Oktober 2024
FERM

FERM FKS-165 Manual

13 Oktober 2024
Einhell

Einhell TC-AP 650 E Manual

12 Oktober 2024
Einhell

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024
Einhell

Einhell BT-SM 2534 Manual

11 Oktober 2024
Hitachi

Hitachi C 7MFA(LA) Manual

9 Oktober 2024
Ozito

Ozito ECS-406A Manual

6 Oktober 2024