Hikoki DH24PX2 Manual

Hikoki Hamer DH24PX2

Læs gratis den danske manual til Hikoki DH24PX2 (17 sider) i kategorien Hamer. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Hikoki DH24PX2, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/17
Rotary Hammer
Read through carefully and understand these instructions before use.
Handling instructions
DH 24PX2 • DH 26PX2 • DH 28PX2
DH28PX2
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the infl uence of drugs, alcohol or
medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off -position before connecting
to power source and/or battery pack, picking
up or carrying the tool.
Carrying power tools with your fi nger on the switch
or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of dust collection can reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off .
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
To reduce the risk of injury, user must read
instruction manual.
Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious
injury.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/
EU on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
2

Produkt Specifikationer

Mærke: Hikoki
Kategori: Hamer
Model: DH24PX2

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikoki DH24PX2 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hamer Hikoki Manualer

Hikoki

Hikoki PH-65A Manual

10 September 2024
Hikoki

Hikoki H41SA Manual

27 August 2024
Hikoki

Hikoki H50 Manual

23 August 2024
Hikoki

Hikoki DH26PMC Manual

23 August 2024
Hikoki

Hikoki DH14DL Manual

23 August 2024
Hikoki

Hikoki DH38MS Manual

23 August 2024
Hikoki

Hikoki DH25PA Manual

23 August 2024
Hikoki

Hikoki DH36DPE Manual

23 August 2024
Hikoki

Hikoki DH24PX2 Manual

23 August 2024
Hikoki

Hikoki DH24PH2 Manual

23 August 2024

Hamer Manualer

Nyeste Hamer Manualer

Wiha

Wiha FibreBuzz Manual

27 December 2024
Bavaria

Bavaria BRH 1500/1 Manual

6 December 2024
Bavaria

Bavaria BRH 1208 E Manual

6 December 2024
Milwaukee

Milwaukee M18 Fuel ONE-KEY 2915-22 Manual

4 Oktober 2024
DeWalt

DeWalt D25201K Manual

29 September 2024
Milwaukee

Milwaukee M12 Fuel 2416-22 Manual

16 September 2024
Powerplus

Powerplus POWX11861 Manual

13 September 2024
DeWalt

DeWalt DW568K Manual

12 September 2024
Anova

Anova DM600 Manual

6 September 2024
DeWalt

DeWalt DWD520 Manual

6 September 2024