Hikoki NT1865DBSL Manual

Hikoki Hæftemaskine NT1865DBSL

Læs gratis den danske manual til Hikoki NT1865DBSL (29 sider) i kategorien Hæftemaskine. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Hikoki NT1865DBSL, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/29
Handling instructions
NT 1865DBAL NT 1865DBSL NT 1850DBSL・ ・
NT 1850DBSL
NT 1865DBSL
NT 1865DBAL
2
power source and/or battery pack, picking up or
carrying the tool.
Carrying power tools with your fi nger on the switch
or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off .
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may aff ect the
power tool s operation.ʼ
If damaged, have the power tool repaired before
use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed.
Use of the power tool for operations diff erent from
those intended could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specifi ed by the
manufacturer.
A charger that is suitable for one type of battery pack
may create a risk of fi re when used with another
battery pack.
b) Use power tools only with specifi cally
designated battery packs.
Use of any other battery packs may create a risk of
injury and fi re.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the infl uence of drugs, alcohol or
medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off position before connecting to

Produkt Specifikationer

Mærke: Hikoki
Kategori: Hæftemaskine
Model: NT1865DBSL

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikoki NT1865DBSL stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hæftemaskine Hikoki Manualer

Hikoki

Hikoki NR 1890DCA Manual

9 Juli 2025
Hikoki

Hikoki NT1865DSA Manual

9 Juli 2025
Hikoki

Hikoki NT65MA4 Manual

25 August 2024
Hikoki

Hikoki NR90AD Manual

25 August 2024
Hikoki

Hikoki NT1865DBSL Manual

25 August 2024
Hikoki

Hikoki NC40G Manual

23 August 2024
Hikoki

Hikoki NV65HMC Manual

23 August 2024
Hikoki

Hikoki NV100H Manual

23 August 2024
Hikoki

Hikoki NT65GS Manual

23 August 2024
Hikoki

Hikoki NR90AE Manual

23 August 2024

Hæftemaskine Manualer

Nyeste Hæftemaskine Manualer

Bosch

Bosch GBA 12V 2.0Ah Professional Manual

9 Juli 2025
Proline

Proline 66392 Manual

8 Juli 2025
Craftsman

Craftsman CMCN630PTB Manual

8 Juli 2025
Makita

Makita AF550H Manual

8 Juli 2025
Makita

Makita AN635H Manual

8 Juli 2025
NEO Tools

NEO Tools 14-572 Manual

8 Juli 2025
Makita

Makita AF635 Manual

8 Juli 2025
NEO Tools

NEO Tools 14-570 Manual

8 Juli 2025
Graphite

Graphite 59G402 Manual

8 Juli 2025
Topex

Topex 74L232 Manual

7 Juli 2025