2
English
c) Prevent unintentional starting. Ensure the
switch is in the o-position before connecting
to power source and/or battery pack, picking up
or carrying the tool.
Carryingpowertools withyour ngeronthe switch
or energising power tools that have the switch on
invitesaccidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
Awrenchorakeyleft attachedtoarotatingpartof
thepowertoolmayresultinpersonalinjury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpectedsituations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.
Looseclothes,jewelleryorlonghaircanbecaughtin
movingparts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
h) Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles.
A careless action can cause severe injurywithin a
fractionofasecond.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
Thecorrectpowertoolwilldothejobbetterandsafer
attherateforwhichitwasdesigned.
b) Do not use the power tool if the switch does not
turn it on and o.
Any power tool that cannot be controlled with the
switchisdangerousandmustberepaired.
c) Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Suchpreventivesafety measuresreducetheriskof
startingthepowertoolaccidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Powertoolsaredangerousinthehandsofuntrained
users.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may aect the power toolʼs operation. If
damaged, have the power tool repaired before
use.
Many accidents are caused by poorly maintained
powertools.
f) Keep cutting tools sharp and clean.
Properlymaintainedcutting toolswithsharpcutting
edgesarelesslikelytobindandareeasiertocontrol.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed.
Use of the power tool for operations dierent from
thoseintendedcouldresultinahazardoussituation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING
Read all safety warnings, instructions, illustrations and
specications provided with this power tool.
Failure to follow all instructions listed below may result in
electricshock,reand/orseriousinjury.
Save all warnings and instructions for future reference.
Theterm“powertool”inthewarningsrefers toyourmains-
operated(corded)powertoolorbattery-operated(cordless)
powertool.
1) Work area safety
a) Keep work area clean and well lit.
Clutteredordarkareasinviteaccidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust.
Powertoolscreatesparkswhichmayignitethedust
orfumes.
c) Keep children and bystanders away while
operating a power tool.
Distractionscancauseyoutolosecontrol.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodiedplugs and matching outletswill reduce
riskofelectricshock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
bodyisearthedorgrounded.
c) Do not expose power tools to rain or wet
conditions.
Waterenteringa powertoolwillincreasetheriskof
electricshock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electricshock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use ofacordsuitable foroutdoor usereducesthe
riskofelectricshock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
UseofanRCDreducestheriskofelectricshock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or
medication.
Amomentofinattentionwhileoperatingpowertools
mayresultinseriouspersonalinjury.
b) Use personal protective equipment. Always
wear eye protection.
Protectiveequipmentsuchasadustmask,non-skid
safetyshoes,hardhatorhearingprotectionusedfor
appropriateconditionswillreducepersonalinjuries.
(Original instructions)
