©2022 Hangzhou HikAuto Technology Co., Ltd. All rights reserved.
AbouĒ his Manual
The Manual includes instrucǺons for using and managing the Product.
Pictures, charts, images and all other informaǺon hereinaĔer are for
descripǺon and explanaǺon only. The informaǺon contained in the
Manual is subjecÍ o change, without noǺce, due to firmware updates
or other reasons.
Trademarks
•and other Hikvision's trademarks and logos
are the properǺes of Hikvision in various jurisdicǺons.
•Other trademarks and logos menǺoned are the properǺes of
their respecǺve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL
FAULTS AND ERRORS”. HIKAUTO MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE
USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKAUTO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION
OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKAUTO HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKAUTO SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKAUTO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING
THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY,
YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT
DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING
WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL
PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY
RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED
END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF
WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR
UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
FCC InformaǺon
Please take attenǺon that changes or modificaǺon not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuanÍ o part 15 oĔhe
FCC Rules. These limits are designed to provide reasonable protecǺon
against harmful interference when the equipmenǺs operated in a
residenǺal environment. This equipment generates, uses and can
radiate radio frequency energy and, if noǺnstalled and used in
accordance with the instrucǺons, may cause harmful interference to
radio communicaǺons. However, there is no guarantee that
interference will not occur in a parǺcular installaǺon. IĔhis equipment
does cause harmful interference to radio or television recepǺon, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correcÍ he interference by one or more oĔhe
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaǺon between the equipment and receiver.
—ConnecÍ he equipmenǺnto an outlet on a circuit dif ferenŐrom that
to which the receiver is connected.
—ConsulÍ he dealer or an experienced radio/TV technician for help
FCC CondiǺons
This device complies with part 15 oĔhe FCC Rules. OperaǺon is subject
to the following two condiǺons:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operaǺon.
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized
European standards listed under the RE DirecǺve
2014/53/EU, the EMC DirecǺve 2014/30/EU, the LVD DirecǺve
2014/35/EU, the RoHS DirecǺve 2011/65/EU.
2012/19/EU (WEEE direcǺve): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this producÍ o your local supplier upon
the purchase of equivalent new equipment, or dispose ofit at
designated collecǺon points. For more informaǺon see:
www.recyclethis.info.
2006/66/EC (battery direcǺve): This product
contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentaǺon for specific battery
informaǺon. The battery is marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or to a designated
collecǺon point. For more informaǺon see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.
This device complies with Industry Canada licence-exempt RSS
standard(s). OperaǺon is subjecÍ o the following two condiǺons:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operaǺon oĔhe device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence. L'exploitaǺon
est autorisée aux deux condiǺons suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'uǺlisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est suscepǺble d'en
compromettre le foncǺonnement.
Under Industry Canada regulaǺons, this radio transmitter may
only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce
potenǺal radio interference to other users, the antenna type and
its gain should be so chosen thaÍ he equivalenǺsotropically
radiated power (e.i.r.p.) is not more than that necessary for
successful communicaǺon.
Conformément à la réglementaǺon d'Industrie Canada, le présent
émetteur radio peut
foncǺonner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectrique à
l'intenǺon des autres uǺlisateurs, il faut choisir le type d'antenne
et son gain de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communicaǺon saǺsfaisante.
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
Cet équipement doit être installé et uǺlisé à une distance
minimale de 20 cm entre le radiateur et votre corps.