Hikvision DS-2CE56C5T-VFIT3 Manual

Hikvision Overvågningskamera DS-2CE56C5T-VFIT3

Læs gratis den danske manual til Hikvision DS-2CE56C5T-VFIT3 (4 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Hikvision DS-2CE56C5T-VFIT3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

1 Introduction

1.1 Product Features

1.2 Overview

2 Installation

Before you start:

Thank you for purchasing our product. If there

are any questions, or requests, please do not

hesitate to contact the dealer.

This manual applies to DS-2CE56C5T-VFIT3 and

DS-2CE16C5T-(A)VFIR3.

This manual may contain several technical

incorrect places or printing errors, and the

content is subject to change without notice.

The updates will be added to the new version of

this manual. We will readily improve or update

the products or procedures described in the

manual.

DISCLAIMER STATEMENT

Underwriters Laboratories Inc. (”UL” has not)

tested the performance or reliability of the

security or signaling aspects of this product.

UL has only tested for fire, shock or casualty

hazards as outlined in Ul’s Standard(s) for Safety,

UL60950-1. UL Certification does not cover the

performance or reliability of the security or

signaling aspects of this product. UL MAKES NO

REPRESENTATIONS, WARRANTIES OR

CERTIFICATIONS WHATSOEVER REGARDING

0100001040603

Regulatory Information

FCC Information

FCC compliance: This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in

a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

FCC Conditions

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

EU Conformity Statement

2006/66/EC (battery directive):

This product contains a battery

that cannot be disposed of as

unsorted municipal waste in the

European Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your

supplier or to a designated collection point. For

more information see:www.recyclethis.info.

THE PERFORMANCE OR RELIABILITY OF ANY

SECURITY OR SIGNALING RELATED FUNCTIONS

OF THIS PRODUCT.

This camera adopts new generation sensor with

high sensitivity and advanced circuit board design

technology. It possesses the features of high

resolution, low distortion, and low noise, etc. It is

extremely suitable for supervisory system and

image processing system.

The main features are as follows:

Figure 2-1 The Drill Template

UD.6L0201D1454A01

TURBO HD

720P Turret &Bullet Camera

User Manual

This product and - if applicable -

the supplied accessories too are

marked with "CE" and comply

therefore with the applicable harmonized

European standards listed under the Low Voltage

Directive 2006/95/EC, the EMC Directive 2004/

108/EC, the RoHS Directive 2011/65/EU.

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points.

For more information see:www.recyclethis.info.

2012/19/EC (WEEE directive):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, return

this product to your local supplier

1.2.1 Overview of Type I Camera

l Please make sure that the device in the package

is in good condition and all the assembly parts

are included.

l Make sure that all the related equipment is

power-off during the installation.

l Check the specification of the products for the

installation environment.

l Check whether the power supply is matched

with your power output to avoid damage.

l Please make sure the wall is strong enough to

withstand three times the weight of the camera

and the mounting.

l If the wall is the cement wall, you need to insert

expansion screws before you install the camera.

If the wall is the wooden wall, you can use

self-tapping screw to secure the camera.

l If the product does not function properly,

please contact your dealer or the nearest

service center. Do not disassemble the camera

for repair or maintenance by yourself.

2.1 Installation of Type CameraI

l High performance CMOS sensor and high

resolution bring high-quality image;

l Low illumination, 0.01 Lux @ (F1.2, AGC ON),

0 Lux with IR;

l Support IR cut filter with auto switch;

l OSD menu, parameters are configurable;

l Support auto white balance, auto gain control,

electronic shutter control and internal

synchronization;

l Advanced Engineering Design and patent

universal adjustable structure provides

convenient adjustment and high reliability;

lSMART IR mode;

l Unit transmission control;

l Advanced 3-axis design meets different

installation requirements;

l Ingress protection: IP66.

1.Drill the screw holes and the cable hole on the

ceiling according to the supplied drill template.

2 Push the lock button to disassemble the camera

from the mounting base.

3.Fix the mounting base to the ceiling.

Figure 2-2 Release The Lock Screw

Steps:

PUSH

The HD video output mode is set as the default.

You can short the white and black line-end of the

control switch cable or press the dip switch to

switch the mode as CVBS output.

Figure 1-2 Overview of Type CameraII

Figure 1-1 Overview of Type I Camera

1.2.2 Overview of Type Camera

HD Video Cable

CVBS Cable

Switch Cable

Enclosure

Zoom & Focus

Lock ButtonLock Button

Mounting Base

Camera

Powe r Cable

Mounting Base

Sun Shield

Main Body

Lens

IR LED

HD Video Cable

CVBS Cable

Power Cable

Adjusting Sheet

Focus

Zoom

Dip Switch

Menu Button

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Overvågningskamera
Model:	DS-2CE56C5T-VFIT3

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikvision DS-2CE56C5T-VFIT3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Hikvision Manualer

Hikvision DS-2CD1T63G2P-LIUF Manual

21 Oktober 2025

Hikvision THC-T159-LPS Manual

21 Oktober 2025

Hikvision ECT-D32V2 Manual

29 September 2025

Hikvision DS-2CD4125FWD-IZ Manual

14 September 2025

Hikvision THC-T159-LMS Manual

4 August 2025

Hikvision DS-2CD3086G2H-LIU Manual

29 Juli 2025

Hikvision DS-2DF1-402 Manual

28 Juli 2025

Hikvision DS-9116HFI-S Manual

28 Juli 2025

Hikvision iDS-UC4P Manual

28 Juli 2025

Hikvision DS-2AE4215TI-A Manual

28 Juli 2025

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Digital Watchdog Star-Light AHD DWC-D4283WTIR Manual

4 November 2025

Digital Watchdog MEGApix DWC-MHS5W37T Manual

4 November 2025

Digital Watchdog MegaPix DWC-MPBW8WI2T Manual

4 November 2025

Digital Watchdog MegaPix IVA+ DWC-MPVA5WiAT Manual

4 November 2025

MuxLab 500791-V2 Manual

4 November 2025

Digital Watchdog MegaPix DWC-XSTD05MF Manual

4 November 2025

Digital Watchdog MEGApix DWC-MB44WI650WC1T Manual

4 November 2025

MuxLab 500791-NDI Manual

4 November 2025

DVDO -C7WIFI-1-NDI-G Manual

4 November 2025

OOSSXX OSX-POE Manual

4 November 2025