Hikvision DS-2CE56D1T-VFIR3 Manual

Hikvision Overvågningskamera DS-2CE56D1T-VFIR3

Læs gratis den danske manual til Hikvision DS-2CE56D1T-VFIR3 (4 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Hikvision DS-2CE56D1T-VFIR3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

TVI Turret & Bullet Camera

User Manual

Regulatory Information

FCC Information

FCC compliance: This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in

a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

FCC Conditions

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

EU Conformity Statement

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/EC (battery directive):

This product contains a battery that

cannot be disposed of as unsorted

municipal waste in the European

Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your

supplier or to a designated collection point. For

more information see: www.recyclethis.info.

UD.6L0201D1937A01

2012/19/EU (WEEE directive):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, return

this product to your local supplier

This product and - if applicable - the

supplied accessories too are marked

with "CE" and comply therefore with

the applicable harmonized European

standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC,

the RoHS Directive 2011/65/EU.

TURBO HD

This series of camera adopts new generation

sensor with high sensitivity and advanced circuit

design technology It features high resolution,.

low image distortion and low noise, etc , which.

makes it suitable for surveillance system and

image processing system.

l High performance CMOS sensor and high

resolution bring high-quality image;

l Low illumination;

l OSD menu, parameters are configurable;

Support auto white balance, auto gain control,

electronic shutter control;

Support image effect adjustment;

Unit transmission control;

l Advanced 3-axis design meets different

installation requirements.

1 Introduction

1.1 Product Features

2 Installation

l Check the specification of the products for the

installation environment.

l Check whether the power supply is matched

with your power output to avoid damage.

l Please make sure the wall is strong enough to

withstand three times the weight of the camera

and the mounting.

l If the wall is the cement wall, you need to insert

expansion screws before you install the camera.

If the wall is the wooden wall, you can use

self-tapping screw to secure the camera.

l If the product does not function properly,

please contact your dealer or the nearest

service center. Do not disassemble the camera

for repair or maintenance by yourself.

1.2 Overview

1.2.1 Overview of Type I Camera

1.2.2 Overview of Type Camera

Figure 1-1 Overview of Type I Camera

Figure 1-2 Overview of Type CameraII

2.1 Installation of Type CameraI

Steps:

1.Drill the screw holes and the cable hole on the

ceiling according to the supplied drill template.

Figure 2-1 The Drill Template

2 Push the lock button to disassemble the camera

from the mounting base.

Figure 2-2 Release The Lock Screw

l Please make sure that the device in the package

is in good condition and all the assembly parts

are included.

l Make sure that all the related equipment is

power-off during the installation.

3.Fix the mounting base to the ceiling.

Before you start:

Cameras in some models do not support OSD

menu. For actual operation, please refer to the

specification of each model.

4.Route the cables to the cable hole and connect

the corresponding cables.

5.Secure the camera to the mounting base by

supplied screws. Keep the word UP on the camera

being upright during the installation to make the

image showing normally.

Thank you for purchasing our product. If there

are any questions, or requests, please do not

hesitate to contact the dealer.

This manual applies to

This manual may contain several technical

incorrect places or printing errors, and the

content is subject to change without notice.

The updates will be added to the new version of

this manual. We will readily improve or update

the products or procedures described in the

manual.

0100001050330

Please refer to the product specification for

camera parameters and functions.

Type

Model

Privacy Notice

Surveillance laws vary by jurisdiction. Check

all relevant laws in your jurisdiction before using

this product for surveillance purposes to ensure

that your use of this product conforms.

DS-2CE56D1T-VFIR3

DS-2CE56D1T-AVFIR3

DS-2CE16D1T-VFIR3

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Overvågningskamera
Model:	DS-2CE56D1T-VFIR3
Kode for international beskyttelse (IP):	IP66
Type:	IP-sikkerhedskamera
Bredde:	130.54 mm
Dybde:	102.4 mm
Vægt:	600 g
Produktfarve:	Hvid
Wi-Fi:	Ingen
Bluetooth:	Ingen
Formfaktor:	Kuppel
Understøttede videotilstande:	1080p
Relativ luftfugtighed ved drift (H-H):	0 - 90 %
Format til analogt signal:	NTSC, PAL
Ethernet LAN:	Ingen
Driftstemperatur (T-T):	-40 - 60 °C
Maksimal opløsning:	1930 x 1088 pixel
Understøttelse af sprog:	CHI (SIMPL), ENG
Understøttede grafikopløsninger:	1920 x 1080 (HD 1080)
Forbindelsesteknologi:	Ledningsført
Strømforbrug (maks.):	4.5 W
Strømkilde type:	Vekselstrøm
Monteringstype:	Loft
Diameter:	112.4 mm
Indbygget HDD:	Ingen
Understøttet placering:	Udendørs
Hvidbalance:	Automatisk
Sensortype:	CMOS
Samlet antal megapixels:	2 MP
Grænseflade til montering af objektiv:	M12
Hældningsvinkelområde:	0 - 75 °
Strøm over Ethernet (PoE):	Ingen
Dag/nat funktion:	Ja
Vandafvisende:	Ja
Minimumsbelysning:	0.01 Lux
Panoreringsområde:	0 - 360 °
Rotationsvinkel:	360 °
Maksimale blænderåbning tal:	1.4
Nattesyn:	Ja
LED type:	IR
DC udgangsspænding:	12
Antal kameraer:	1
Synsfelt vinkel (FOV):	114.5 °
Brændviddeområde:	- mm
Kameraets lukkerhastighed:	1/25 - 1/50000 sek./side
Signal/støjforhold:	62 dB
Nattesyn, afstand:	20 m
Flip & spejl:	Ja
Antal sprog:	2