Hikvision DS-2TD2636B-13/P Manual

Hikvision fotokamera DS-2TD2636B-13/P

Læs gratis den danske manual til Hikvision DS-2TD2636B-13/P (1 sider) i kategorien fotokamera. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Hikvision DS-2TD2636B-13/P, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Highly Accurate Thermographic Camera

Installation and Conguration Guide

Temperature Measurement Range: 86 113 30 45  F (   C)

Working Temperature: 50 95 10 35  F (   C)

Accuracy: ± ±0.9F ( 0.5C)

Resoluon: 384 ×288

Installation



Wall-Mounted Deployment

Conguration

Recommended Installaon Parameters

Model

Distance

(between human

and

camera)

Height

Elevaon

Angle

-2TD2636B-

13/P

8' 2"23'

(2.5 m 7 m)

5' 7" 8‘ 2"

(1.7 m



2.5 m)

≤20°

Advice

1. Select Body Thermometry as VCA Resource Type.

2. Go to Conguraon > Local interface, enable and save

the following sengs:

3. Go to Body Thermometry > Basic Setngs. Congure

and save the following setngs:

Emissivity: For human skin, this value is normally set as 0.98.

Distance: The actual distance between the camera and

human.

Check Enable Face Detecon and Display Temperature.

Suggest uncheck Upload Captured Face Image Display Face and

Temperature Posion if its not required.

Set Alarm Temp. Pre-alarm Temp.and

Press Draw Area to adjust face detecon region.

Click Max. Pupil Distance Min. Pupil Distance and to draw

width lter frame. Max and Min distance refer to camera

detecon distance.

4. Congure Camera 01 (Opcal) Setngs.

Uncheck Enable Blackbody Correcon if no blackbody is used.

Check Enable of Body Temperature Compensaon, and keep

parameters as default.

DS-2TD2636B

The environment can easily inuence the performance of thermal cameras Therefore, thermal cameras are .

required to be used in a stable indoor environment without wind, and the ambient temperature should be

consistent.

Here s some advice:’

1. Set up a one-way screening zone, and ensure that the camera can clearly see the face of the person whose

skin-surface temperature is being measured.

2. Avoid backgrounds that are too crowded or bright.

3. Turn the camera on minutes before taking skin-surface temperature measurements because the camera 30 ,

needs to be stable.

4. If there is a large dierence between the indoor and outdoor temperatures it is suggested to wait more than ,

ve minutes before measuring the skin-surface temperature of someone who just got in.

5. Follow the guidance of required temperature measurement distance and height.

5. Congure Camera 02 (Thermal) Setngs.

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	fotokamera
Model:	DS-2TD2636B-13/P
Brugervejledning:	Ja
Ethernet LAN-porte (RJ-45):	1
Ethernet LAN:	Ja
Webbrowser:	Ja
Forbindelsesteknologi:	Ledningsført
Understøttede netværksprotokoller:	IPv4/IPv6, HTTP, HTTPS, 802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMP, ICMP, DHCP, PPPoE
IP-adresse filtrering:	Ja
Video komprimeringsformater:	H.264, H.265
Understøttet placering:	Udendørs
Sensortype:	CMOS
Progressiv scanning:	Ja
Voice codecs:	G.711, G.722.1, G.726, MP2L2, PCM
Minimumsbelysning:	0.001 Lux
Optisk sensorstørrelse:	1/2.7 "
Ethernet-grænsefladetype:	Hurtigt ethernet
HTTPS -kryptering:	Ja
Kameraets lukkerhastighed:	1/100 sek./side
Videostreaming:	Ja
Antal sprog:	32