Hikvision DS-3E0106HP-E Manual

Hikvision Skifte DS-3E0106HP-E

Læs gratis den danske manual til Hikvision DS-3E0106HP-E (2 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 120 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 60.5 anmeldelser. Har du et spørgsmål om Hikvision DS-3E0106HP-E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

345

Device Connecon

Connect your devices according to your actual networking requirements.

Interfaces

Rear Panel

Front Panel

Packing List

Switch x 1 Quick Start

Guide x 1

Power Cord x 1

Hi-PoE Port

Hi-PoE port is used for other Hi-PoE PTZ cameras connecon, and

the max. power is 60 W.

1/2 Ports

High priority ports, can guarantee prior and stable transmission.

PoE Ports

100 Mbps PoE ports are used for other PoE devices connecon.

RJ45 Ports

100 Mbps RJ45 ports are used for device connecon via network cables.

LINK/ACT

Indicator

PoE

Indicator

PoE-MAX Indicator

PWR

Indicator PoE Ports RJ45 Ports

Grounding

Terminal

Power

Supply

LINK/ACT

Indicator

Power Adapter x 1

Applicable Models

This manual is applicable to DS-3E0106HP series 100 Mbps Long-Range PoE switch.

Symbol Convenons

The symbols that may be found in this document are deﬁned as follows.

During the installaon and ulizaon of the device, please strictly conform to electrical

safety rules in diﬀerent naons and regions.

Use the aached power adaptor only and not to change the adaptor randomly. Please

refer to speciﬁcaon table for speciﬁc requirements of power adaptor.

Never aempt to disassemble the device yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or maintenance.)

The device must be installed in machine room only, and only maintenance staﬀ or

qualiﬁed person should access to the device.

Do not touch the upper cover area of the device that may be overheated.

Power must be shut down during cable connecon, device installaon and

dismantlement.

You shall acknowledge that the use of the device with Internet access might be under

network security risks, please strengthen protecon for your personal informaon and

data security. If you ﬁnd the device might be under network security risks, please contact

with us.

Proper conﬁguraon of all passports and other security sengs is the responsibility of

the installer, and you shall keep user name and passports properly.

Please keep all original packing materials properly. If the product does not work properly,

pack the switch in its original packing materials for shipping. We shall not assume any

responsibility for damages caused by improper packing materials during shipping.

Ensure that your devices powered via the PoE port have their shells protected and

ﬁre-proofed, because the switches are not compliant with the Limited Power Source

(LPS) standard.

This is a class A product and may cause radio interference in which case the user may be

required to take adequate measures.

Indicates a hazard with a high level of risk, which if

not avoided, will result in death or serious injury.

Symbol Descripon

Provides addional informaon to emphasize or

supplement important points of the main text.

Indicates a potenally hazardous situaon, which if not

avoided, could result in equipment damage, data loss,

performance degradaon, or unexpected results.

•

DIP Switch

ON: Extend mode, ports 1-4 support network transmission of up to

300 m, and the speed rate of the port is 10 Mbps.

OFF: Standard mode, the network transmission of PoE ports is up to

100 m, and the speed rate of the port is 100 Mbps.

Grounding Terminal

The grounding terminal is used to connect to the ground cable to

protect the switch from lightning.

Power Supply

Use the aached power cord to connect the switch to socket.

Hi-PoE UPLINKPoE

If any accessories are damaged or lost, keep the package intact

and contact your dealer for replacement.

OFF ON

Extend

PORT 1-4

PWR

DC 48V

DIP Switch

802.3bt Hi-PoE Dual uplink ports for

CCTV scenario

Up to 300 meters

(Port 1-4)

6 KV Surge Protection

IP Camera

Hi-PoE PTZ

(port 1)

4-Port 10/100M PoE

10/100M Unmanaged PoE Pro-Series

Data

Power+Data(PoE)

Router NVR

Internet

DS-3E0106HP

4-Port 100 Mbps Long-Range PoE Switch

Quick Start Guide

UD13637B-A

678

Power-On Checking

See the following table and check whether your devices are correctly

connected. Aer proper connecon, you can use your switch without

doing any sengs.

Indicator Status Descripon

PWR

Solid

Unlit

Solid

Unlit

Flashing

The switch is powered on normally.

No power supply connected or power

supply is abnormal.

Link/Act

The port is connected.

The port is transming data.

The port is disconnected or connecon

is abnormal.

Please use the aached power cord in package to power up the switch.

The switch supports auto MDI/MDIX of ports, you can use

straight-through cable or crossover cable to connect the switch

and opposite Ethernet devices.

PoE Solid

Unlit

The switch provides power supply to PD

normally.

The switch is disconnected to PD, or

provides power supply to PD abnormally.

PoE-MAX

Solid

Unlit

The output power of the switch is about to

reach or already reaches the upper limit.

The power supply may be abnormal if more

devices are connected.

The switch provides power supply to PD

normally.

Regulatory Informaon

FCC Informaon

Please take aenon that changes or modiﬁcaon not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protecon against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instrucon

manual, may cause harmful interference to radio communicaons. Operaon of this

equipment in a residenal area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

FCC Condions

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two

condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operaon.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed

under the EMC Direcve 2014/30/EU, the LVD Direcve 2014/35/EU,

the RoHS Direcve 2011/65/EU.

2012/19/EU (WEEE direcve): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For proper

recycling, return this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collecon points.

For more informaon see: www.recyclethis.info

2006/66/EC (baery direcve): This product contains a baery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product

documentaon for speciﬁc baery informaon. The baery is marked with this

symbol, which may include leering to indicate cadmium (Cd), lead (Pb),

or mercury (Hg). For proper recycling, return the baery to your supplier or to a designated

collecon point. For more informaon see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Quick Start Guide

Any and all informaon, including, among others, wordings, pictures, graphs are the

properes of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinaer

referred to be “Hikvision”). This user manual (hereinaer referred to be “the Manual”)

cannot be reproduced, changed, translated, or distributed, parally or wholly, by any

means, without the prior wrien permission of Hikvision. Unless otherwise spulated,

Hikvision does not make any warranes, guarantees or representaons, express or implied,

regarding to the Manual.

About this Manual

The Manual includes instrucons for using and managing the product. Pictures, charts,

images and all other informaon hereinaer are for descripon and explanaon only. The

informaon contained in the Manual is subject to change, without noce, due to ﬁrmware

updates or other reasons. Please ﬁnd the latest version in the company website

( ). hp://overseas.hikvision.com/en/

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properes of Hikvision in

various jurisdicons. Other trademarks and logos menoned below are the properes of

their respecve owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED,

WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS

AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A

PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL

HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY

SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG

OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS

OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN

IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE

WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR

ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR

JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE

CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT

THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE

LATER PREVAILS.

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Skifte
Model:	DS-3E0106HP-E
Bredde:	145 mm
Dybde:	68.45 mm
Højde:	25.6 mm
Vægt:	240 g
Produktfarve:	Blå
Pakkevægt:	770 g
Opbevaringstemperatur (T-T):	-40 - 85 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 95 %
Driftstemperatur (T-T):	-10 - 55 °C
Husmateriale:	Metal
Strømforbrug (maks.):	65 W
Netværksstandarder:	IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3u, IEEE 802.3x
LED-indikatorer:	Activity, Link, Power
DC indgangsspænding:	48 V
Indgangsstrøm:	1.35 A
Fuld duplex:	Ja
Strøm over Ethernet (PoE):	Ja
Switch-type:	Ikke administreret
Total Power over Ethernet (PoE):	60 W
Power over Ethernet (PoE) effekt pr. port:	30 W
10G understøttelse:	Ingen
Auto MDI/MDI-X:	Ja
Basis omskiftning RJ-45 Ethernet porte, antal:	6
Basis omskiftning RJ-45 Ethernet porttype:	Fast Ethernet (10/100)
Opbevar-og-frem:	Ja
MAC adresselabel:	2000 entries
Switch kapacitet:	1.2 Gbit/sek.
Antal blæsere:	0 blæser(e)
Power over Ethernet (PoE) porte, antal:	4
Hastighed for videresendelse:	0.893 Mpps