Hikvision DS-XS10G-P Manual

Hikvision Skifte DS-XS10G-P

Læs gratis den danske manual til Hikvision DS-XS10G-P (2 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Hikvision DS-XS10G-P, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Switch

Quick Start Guide

About

AboutAbout this

this

thisthis Document

Document

DocumentDocument

●This Document includes instructions for using and managing the Product.

Pictures, charts, images and all other information hereinafter are for

description and explanation only.

●The information contained in the Document is subject to change, without

notice, due to firmware updates or other reasons. Please find the latest

version of the Document at the Hikvision website (https://

www.hikvision.com). Unless otherwise agreed, Hangzhou Hikvision Digital

Technology Co., Ltd. or its affiliates (hereinafter referred to as "Hikvision")

makes no warranties, express or implied.

●Please use the Document with the guidance and assistance of professionals

trained in supporting the Product.

About

AboutAbout this

this

thisthis Product

Product

ProductProduct

This product can only enjoy the after-sales service support in the country or

region where the purchase is made.

Acknowledgment

AcknowledgmentAcknowledgment of

ofof Intellectual

Intellectual

IntellectualIntellectual Property

Property

PropertyProperty Rights

Rights

RightsRights

●Hikvision owns the copyrights and/or patents related to the technology

embodied in the Products described in this Document, which may include

licenses obtained from third parties.

●Any part of the Document, including text, pictures, graphics, etc., belongs

to Hikvision. No part of this Document may be excerpted, copied, translated,

or modified in whole or in part by any means without written permission.

●and other Hikvision’s trademarks and logos are the

properties of Hikvision in various jurisdictions.

●Other trademarksandlogos mentionedarethe propertiesoftheir respective

owners.

LEGAL

LEGALLEGAL DISCLAIMER

DISCLAIMER

DISCLAIMERDISCLAIMER

●TOTHEMAXIMUMEXTENTPERMITTEDBYAPPLICABLELAW,THISDOCUMENT

AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND

FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS".

HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR

FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU

IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU

FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,

BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS,

ORLOSSOFDOCUMENTATION,WHETHERBASEDONBREACHOFCONTRACT,

TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN

CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

●YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR

INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY

RESPONSIBILITIESFORABNORMALOPERATION,PRIVACYLEAKAGEOROTHER

DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION

WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

●YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE

LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR

USECONFORMSTOTHEAPPLICABLELAW.ESPECIALLY,YOUARERESPONSIBLE,

FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON

THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS

OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION

AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR

ANYPROHIBITEDEND-USES,INCLUDINGTHEDEVELOPMENTORPRODUCTION

OFWEAPONSOFMASSDESTRUCTION, THEDEVELOPMENT ORPRODUCTION

OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT

RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE,

OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

●IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE

APPLICABLE LAW, THE LATTER PREVAILS.

©©Hangzhou

Hangzhou

HangzhouHangzhou Hikvision

Hikvision

HikvisionHikvision Digital

Digital

DigitalDigital Technology

Technology

TechnologyTechnology Co.,

Co.,

Co.,Co., Ltd.

Ltd.

Ltd.Ltd. All

All

AllAll rights

rights

rightsrights reserved.

reserved.

reserved.reserved.

Legal Information

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Provides additional information to emphasize or

supplement important points of the maintext.

Indicates a hazard with a high level of risk, which if not

avoided, will result in deathor serious injury.

Symbol

SymbolSymbol

Description

DescriptionDescription

Indicates a potentially hazardous situation, which if not

avoided, could result in equipment damage, data loss,

performance degradation, or unexpected results.

Applicable Models

This manual is applicable to switches.

Preface

UD38879B-A

① Learn About Your Switch

①

②

③

④

⑤

▷Front Panel (Example)

* Device appearances vary with models. The front and rear panels

below are only provided as an example. The actual device prevails.

▷Rear Panel (Example)

Red port (or VIP port),

used to preferentially

ensure network

transmission in key

service areas.

SFP Fiber Optical Port

Gigabit SFP fiber optical port,

used for connection to another

device via an optical fiber when

the port is plugged into with an

optical module.

10/100 Mbps or gigabit RJ45

port, used for connection to

another device via a network

cable.

RJ45 Port

10/100 Mbps or gigabit PoE

RJ45 port, used for connection

to a powered device (PD) via a

network cable.

PoE RJ45 Port

High-Priority Port

Ports

LINK/ACT Indicator

• Solid on: The switch supplies power to a PD normally.

• Unlit: The switch is disconnected from a PD or power supply is abnormal.

PoE Indicator

• Solid on: The port is connected.

• Flashing: The port is transmitting data.

• Unlit: The port is disconnected or connection is abnormal.

• Solid on: The output power of the switch is about to reach or has reached the upper limit.

The power supply may be abnormal if more devices are connected.

• Unlit: The switch does not supply power to a PD, or supplies power to a PD normally and

its output power does not reach the upper limit. The PoE-MAX indicator will be unlit in 5

seconds after the output power of the switch returns to normal.

PoE-MAX Indicator

①

②

③

• Solid on: The gigabit SFP fiber optical port is connected.

• Flashing: The gigabit SFP fiber optical port is transmitting data.

• Unlit: The gigabit SFP fiber optical port is disconnected or connection is abnormal.

④

Optical Port Indicator

⑤

Indicators

• Solid on: The switch is powered on normally.

• Unlit: No power supply is connected or power supply is abnormal.

PWR Indicator

Scan the QR code to obtain

product introduction, packing

list, and appearance of your

desired device model.

Device Information ▷

Used for switching the

switch’s working mode. If

the corresponding indicator

is solid on, it indicates that

the switch works in this

mode.

Mode Button

Toggle on or off the DIP

switch to enable or

disable the Extend mode

(specified ports of the

switch support network

transmission of up to 300

meters).

DIP Switch

Press and hold the

reset button for about

5 seconds to restore

all the configurations

of the switch to

default settings.

Use the attached power

cord (and power adapter,

if any) to connect the

switch to a power socket.

Grounding Terminal

Power Supply

Reset Button

* The ports, indicators, etc. above are only enumerations. For more information, see Device Information.

Earth

≥ 0.5 m

356

② Install Your Switch

Before You Start

▷Wall-Mounted Installation

• Ensure that the desktop, wall, or rack is stable and

firm enough.

• Keep the room well-ventilated. Leave at least 10 cm

heat dissipation space around the device.

• Keep at least 1.5 cm vertical distance between two

adjacent devices for rack-mounted installation.

Please select an appropriate installation method

according to the actual needs.

Place the device on the desk.

▷Desktop Placement

Steps

1. Check the distance between the two hanging holes

at the bottom of the device.

2. Insert two self-prepared M4 screws into the wall.

3. Align the hanging holes with screws, and hang the

device on the screws.

• The load-bearing capacity of the wall should be 3

times more than the weight of the device.

• Ensure that the distance between the two screws

equals to the distance between the two hanging holes.

• Set aside at least 4 mm of the screw bodies outside

the wall.

Steps

1. Check the grounding and stability of the rack.

2. Use M3 or M4 screws provided in the package to fix

the two L-shaped brackets to both sides of the

device.

▷Rack-Mounted Installation

3. Fix two self-prepared M5 or M6 nuts to the rear side

of the rack on both sides respectively.

4. Place the switch against the rack so that the holes on

the L-shaped brackets are aligned with the holes

where the nuts have been fixed.

5. Fix the brackets to the front side of the rack with two

self-prepared M5 or M6 screws on both sides

respectively to stably install your device.

③ Ground Your Switch

Grounding is used to quickly release overvoltage and

overcurrent induced by lightening for the switch, and to

protect personal safety.

Select an appropriate grounding method according to

your needs.

Grounding Terminal

Grounding Cable

Grounding Bar

▷With Grounding Bar

▷Without Grounding Bar

Grounding Terminal

Grounding Cable

Angle Steel

Steps

1. Connect one end of the grounding cable to the

binding post on the grounding bar.

2. Connect the other end of the grounding cable to the

device's grounding terminal and fix the screw.

If a grounding bar is available at the installation site,

follow the steps below.

If there is no grounding bar but the earth is nearby and

the grounding body is allowed to be buried, follow the

steps below.

Steps

1.Bury an angle steel or steel pipe (≥ 0.5 m) into the

earth.

2.Weld one end of the grounding cable to the angle

steel or steel pipe and embalm the welding point via

electroplating or coating.

3.Connect the other end of the grounding cable to the

device's grounding terminal.

▷RJ45 Port

Use a network cable to connect the device to the RJ45

port of a peer device such as the IP camera (IPC),

network video recorder (NVR), switch, etc.

④ Connect Your Switch to a Peer Device

▷SFP Fiber Optical Port

If the device has a fiber optical port or a combo,

connect the device to a peer device through an optical

fiber connecting optical modules plugged into fiber

optical ports respectively.

• Single-mode optical modules need to be paired.

• Do not bend an optical fiber (curvature radius ≥ 10 cm) overly.

• Do not look directly at an optical fiber connector as laser is

harmful to eyes.

Steps

1. Connect the two paired SFP optical modules with an

optical fiber.

2. Hold the SFP optical module from one side, and

smoothly plug it into the switch along with the SFP

port slot until the optical module and the switch are

closely attached.

3. After powering your switch on, check the status of

the LINK/ACT indicator.

– If the indicator is lit, the link is connected.

– If the indicator is unlit, the link is disconnected.

Check the line, and make sure the peer device has

been started.

For PoE switches, power cables and network cables cannot be

wired together, otherwise the PD or switch ports will be burnt.

Please use the attached power cord (and power

adapter, if any) in package to power on the device.

Before powering your switch on, make sure that:

⑤ Power Your Switch On

Scan the QR code below to quickly get support on answers to

FAQs.

⑥ Get More Information

• The operating power supply is compliant with the

rated input standard.

• Port cables and grounding cables are correctly

connected.

• If there is outdoor cabling, connect a lightning rod

and lightening arrester to the cable.

The number of screws provided for fixing L-shaped

brackets to the device varies with device models.

• When connected to a network cable, the combo is a

RJ45 port.

• When plugged into with an optical module and

connected to an optical fiber, the combo functions as

a fiber optical port.

• When connected to both the network cable and

optical fiber at the same time, the combo works as a

fiber optical port.

The following figures are for your reference only.

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Skifte
Model:	DS-XS10G-P

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikvision DS-XS10G-P stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Hikvision Manualer

Hikvision DS-XS10G-P Manual

29 Marts 2025

Hikvision DS-3E0516P-O Manual

31 August 2024

Hikvision NS-0106P-35 Manual

15 August 2024

Hikvision NS-0326P-230 Manual

12 August 2024

Hikvision DS-3E1326P-E Manual

7 August 2024

Hikvision NS-0310P-60 Manual

30 Juli 2024

Hikvision NS-0109P-60 Manual

29 Juli 2024

Hikvision DS-3E2528-H Manual

26 April 2024

Hikvision DS-3E0310P-E Manual

8 April 2024

Hikvision NS-0105P-35 Manual

17 Marts 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025