Hikvision IPC-D120H Manual


Læs gratis den danske manual til Hikvision IPC-D120H (32 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Hikvision IPC-D120H, eller vil du spørge andre brugere om produktet?

Side 1/32
1
Network Dome Camera
Quick Start Guide
Network Dome Camera·
·
·
··Quick Start Guide
2
Quick Start Guide
COPYRIGHT © 2017 Hangzhou Hikvision Digital Technology Co., Ltd .
ALL RIGHTS RESERVED.
Any and all informaon, including, among others, wordings, pictures,
graphs are the properties of Hangzhou Hikvision Digital Technology
Co., Ltd. or its subsidiaries (hereinaer referred to be “Hikvision”).
This user manual (hereinaer referred to be the Manual cannot “ ”)
be reproduced, changed, translated, or distributed, parally or
wholly, by any means, without the prior wrien permission of
Hikvision. Unless otherwise spulated, Hikvision does not make any
warranes, guarantees or representaons, express or implied,
regarding to the Manual.
About this Manual
This Manual is applicable to D1XX Network Dome Camera.
The Manual includ instrucons for using and managing the es
product. Pictures, charts, images and all other informaon
hereinaer are for descripon and explanaon only. The
informaon contained in the Manual is subject to change, without
noce, due to rmware updates or other reasons. Please nd the
latest version in the company website
( hp://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professional s.
Trademarks Acknowledgement
and other Hikvisions trademarks and logos are the
properes of Hikvision in various jurisdicons. Other trademarks and
logos menoned below are the properes of their respective
owners.
Network Dome Camera·
·
·
··Quick Start Guide
3
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, IS PROVIDED AS IS , WITH ALL FAULTS AND ERRORS, “ ”
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE
LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAG INCLUDING, AMONG OTHERS, DAMAGES FOR ES,
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF
THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL
NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION PLEASE CHECK ALL .
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS
PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE
APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT
THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
Network Dome Camera·
·
·
··Quick Start Guide
4
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protecon against harmful interference in a residenal installaon.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio
communicaons. However, there is no guarantee that interference
will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television recepon, which
can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separaon between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Condions
Network Dome Camera·
·
·
··Quick Start Guide
5
This device complies with part 15 of the FCC Rules. Operaon is
subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized European
standards listed under the EMC Direcve 201 U, the RoHS 4/30/E
Direcve 2011/65/EU.
2012/19/EU (WEEE direcve): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collecon points. For more informaon see:
www.recyclethis.info
2006/66/EC (baery direcve): This product
contains a baery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentaon for specic baery
informaon. The baery is marked with this symbol,
which may include leering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the baery to your
supplier or to a designated collecon point. For more informaon
see: www.recyclethis.info
Network Dome Camera·
·
·
··Quick Start Guide
6
Safety Instrucon
These instrucons are intended to ensure that user can use the
product correctly to avoid danger or property lo ss.
The precauon measure is divided into “Warnings” and “Cauons”
Warnings: Serious injury or death may occur if any of the warnings
are neglected.
Cauons: Injury or equipment damage may occur if any of the
cauons are neglected.
Warnings
Proper conguraon of all passwords and other security
sengs is the responsibility of the installer and/or end-user.
In the use of the product, you must be in strict compliance with
the electrical safety regulaons of the naon and region. Please
refer to technical specicaons for detailed informaon.
Input voltage should meet both the SELV (Safety Extra Low
Voltage) and the Limited Power Source with 24 VAC or 12 VDC
Warnings Follow these
safeguards to prevent
serious injury or death.
Cauons Follow these
precauons to prevent
potenal injury or material
damage.
Network Dome Camera·
·
·
··Quick Start Guide
7
according to the IEC60950-1 standard. Please refer to technical
specicaons for detailed informaon.
Do not connect several devices to one power adapter as
adapter overload may cause over-heang or a re hazard.
Please make sure that the plug is rmly connected to the power
socket. When the product is mounted on wall or ceiling, the
device shall be rmly xed.
If smoke, odor or noise rise from the device, turn o the power
at once and unplug the power cable, and then please contact
the service center.
Cauons
Make sure the power supply voltage is correct before using the
camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with ngers. If cleaning is
necessary, use clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period,
please replace the lens cap to protect the sensor from dirt.
Do not aim the camera at the sun or extra bright places.
Blooming or smearing may occur otherwise (which is not a
malfuncon), and aect the endurance of sensor at the same
me.
The sensor may be burned out by a laser beam, so when any
laser equipment is in using, make sure that the surface of
sensor will not be exposed to the laser beam.
Network Dome Camera·
·
·
··Quick Start Guide
8
Do not place the camera in extremely hot, cold (the operang
temperature shall be - °C to +60 , or - °C to + °C if the 30 °C 40 60
camera model has an “H” in its sux), dusty or damp locaons,
and do not expose it to high electromagnec radiaon.
To avoid heat accumulaon, good venlaon is required for
operang environment.
Keep the camera away from liquid while in use.
While in delivery, the camera shall be packed in its original
packing, or packing of the same texture.
Regular part replacement: a few parts (e.g. electrolyc
capacitor) of the equipment shall be replaced regularly
according to their average enduring me. The average me
varies because of dierences between operang environment
and using history, so regular checking is recommended for all
the users. Please contact with your dealer for more details.
Improper use or replacement of the baery may result in
hazard of explosion. Replace with the same or equivalent type
only. Dispose of used baeries according to the instrucons
provided by the baery manufacturer.
If the product does not work properly, please contact your
dealer or the nearest service center. Never aempt to
disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)
0504061071124
Network Dome Camera·
·
·
··Quick Start Guide
9
Table of Contents
1 Appearance Descripon ............................................................... 10
2 Installaon .................................................................................... 12
3 Set the Network Camera over the LAN ......................................... 17
Wiring ........................................................................... 17 3.1
Acvate the Camera ...................................................... 18 3.2
Acvaon via Web Browser ................................ 18 3.2.1
Acvaon via SADP Soware ............................. 20 3.2.2
Modify the IP Address ................................................... 21 3.3
4 Access via Web Browser ............................................................... 24
5 Operate via Hik-Connect App ....................................................... 26
Enable Hik-Connect Service on Camera ......................... 26 5.1
Enable Hik-Connect Service via SADP Soware .. 26 5.1.1
Enable Hik-Connect Service via Web Browser .... 27 5.1.2
Hik-Connect Setup ........................................................ 29 5.2
Add Camera to Hik-Connect .......................................... 29 5.3
Inialize the Memory Card ............................................ 31 5.4
Network Dome Camera·
·
·
··Quick Start Guide
10
The appearance of th network dome camera shown as the gure is is
1- 1.
6
7
8
5
1
2
3
4
Camera Overview Figure 1-1
Network Dome Camera·
·
·
··Quick Start Guide
11
Descripon of Type I/ Camera Table 1-1 II
No.
Descripon
1
Mounng Base
2
Pan Adjusng Mount
3
Bubble
4
Network & Power Interface
5
IR LED
6
Lens
7
Black Liner
8
Safety Rope
Notes:
Power on the camera when pressing the RESET buon, and
press buon for another 10 seconds to restore the default
sengs, including the user name, password, IP address, port
No., etc.
For cameras support power over Ethernet (PoE), the power is
passed along with data on Ethernet cabling. And a switch
supports PoE funcon is required.
Network Dome Camera·
·
·
··Quick Start Guide
12
Before you start:
Make sure the device in the package is in good condion and all
the assembly parts are included.
The standard power supply is 12 V . Make sure your power DC
supply matches with your camera.
Make sure all the related equipment is power-o during the
installaon.
Check the specicaon of the products for the installaon
environment.
Make sure that the wall is strong enough to withstand four
mes the weight of the camera and the bracket.
For the camera that supports IR, you are required to pay aenon to
the following precauons to prevent IR reecon:
Dust or grease on the dome cover will cause IR reecon. Do
not remove the dome cover lm unl the installaon is finished.
If there is dust or grease on the dome cover, clean the dome
cover with clean so cloth and isopropyl alcohol.
Make sure that there is no reecve surface too close to the
camera lens. The IR light from the camera may reect back into
the lens to cause the reecon.
The foam ring around the lens must be seated ush against the
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to camera body so that the foam ring
and the dome cover are aached seamlessly.
Network Dome Camera·
·
·
··Quick Start Guide
13
Steps:
1. Aach the dill template to the ceiling.
2. Drill the screw holes and cable hole (oponal) in the ceiling
according to the drill template.
Note:
Cable hole is required when you adopt ceiling outlet to route the
cables.
Drill Template
Hole A: for cables routed through the ceiling
screw hole 1: for Mounting Base
1
1
A
3 4.5 mm (0.2'')Φ
Φ 100.4 mm (4'')
Φ 111 mm (4.4'')
Drill Template Figure 2-1
3. Loosen the set screws with a hex wrench (supplied) to remove
the bubble.
Note:
The three screws are not required to be unscrewed totally.
Network Dome Camera·
·
·
··Quick Start Guide
14
Remove the Bubble Figure 2-2
4. Fix the mounng base on the ceiling with supplied screws.
Fix the Mounng Base Figure 2-3


Produkt Specifikationer

Mærke: Hikvision
Kategori: Overvågningskamera
Model: IPC-D120H

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikvision IPC-D120H stil et spørgsmål nedenfor, og andre brugere vil svare dig