Hitachi PDADJ Manual


Læs gratis den danske manual til Hitachi PDADJ (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 119 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 60 anmeldelser. Har du et spørgsmål om Hitachi PDADJ, eller vil du spørge andre brugere om produktet?

Side 1/5
Page 1 of 5
Mounting Instructions
HITACHI PDADJ PLASMA MOUNT
For sizes 32”, 37”, 42” & 50”
1. Please read your plasma screen instruction manual prior to installation of
this product, carefully noting safety concerns regarding installation
location.
2. Always have 2 people working on the installation
3. Care must be taken, that the wall to be used, is of sufficient strength. Only
fix to solid timber studs, or to brickwork
4. Install wall plate (Part 1) in required position, using heavy duty screws or
concrete anchors. Pay particular attention to keep the plate level.
5. Install cabling, according to your manufacturer’s instructions.
6. Loosen angle adjusting nuts, and pull pivots forward. (see fig 1)
7. Remove the 6mm retaining screws (see fig 2) and lift off parts 3 (see fig 3)
and fix to the back of the TV panel using bolts provided (see fig 4)
8. Employing 2 people, lift the TV panel, and hook onto the pivot brackets.
9. Refit the two 6mm retaining screws into pivot brackets (parts 2& 3)
10. Tilt panel to desired viewing angle (from 0° - 20°) and tighten locknuts
(see fig 1)
11. Finalise all electrical connections.
Page 2 of 5
Parts List
Part 1
Part 2 Part 3 Part 6
Part 4 Part 5


Produkt Specifikationer

Mærke: Hitachi
Kategori: Ikke kategoriseret
Model: PDADJ

Har du brug for hjælp?

Hvis du har brug for hjælp til Hitachi PDADJ stil et spørgsmål nedenfor, og andre brugere vil svare dig