Hobart 403 Manual

Hobart Kødhakker 403

Læs gratis den danske manual til Hobart 403 (8 sider) i kategorien Kødhakker. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Hobart 403, eller vil du spørge andre brugere om produktet?

Side 1/8

701 S. RIDGE AVENUE

TROY, OHIO 45373

937 332-3000

www.hobartcorp.com

MODEL 403 TENDERIZER

ML-38763 403

FORM 37023 Rev A. (August 2024)

– 2 –

Installation, Operation and Care of

MODEL 403 TENDERIZER

SAVE THESE INSTRUCTIONS

GENERAL

The model 403 Tenderizer is designed to tenderize a variety of meat products. The tenderizer consists

of a set of roller units which contain knives that knit together and tenderize pieces of meat as they pass

through the blades. Optional Wide 3/8" or Narrow 3/16" Julienne Knife Lift-out units are available. They are

used to cut food products, such as meats and cheeses, into strips.

INSTALLATION

UNPACKING

Immediately after unpacking, check for possible shipping damage. If the tenderizer is found to be damaged,

save the packaging material and contact the carrier within 5 days of delivery.

Remove machine from the shipping carton and place in the operating location. Remove transparent guard

(4, Fig. 1), lift off motor housing (3, Fig. 1) and remove screw (1, Fig. 2) that plugs the vent hole (see label

taped to machine). Insert dip stick (taped to machine) in vent hole. Replace housing and guard.

A cord with plug is furnished as standard equipment.

Before making electrical connections, check the specications on the machine data plate to ensure they

agree with those of your electrical service.

This machine must be cleaned after installation and before being put into service. Refer to MAINTENANCE

for instructions.

© HOBART, 2024

Fig. 1

Produkt Specifikationer

Mærke:	Hobart
Kategori:	Kødhakker
Model:	403

Har du brug for hjælp?

Hvis du har brug for hjælp til Hobart 403 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kødhakker Hobart Manualer

Hobart 403 Manual

7 Marts 2025

Hobart MG2032 Manual

23 August 2024

Hobart 4246 Manual

23 August 2024

Hobart 4822 Manual

23 August 2024

Hobart 4732A Manual

23 August 2024

Hobart 4812 Manual

23 August 2024

Hobart 4732 Manual

23 August 2024

Hobart 4146 Manual

23 Januar 2024

Kødhakker Manualer

Nyeste Kødhakker Manualer

Stilevs ChefTurco Manual

2 Oktober 2025

ElectriQ eiQMEATG Manual

30 September 2025

Chefman RJ46 Manual

25 September 2025

Harper MG501 Manual

24 September 2025

Livoo DOP257 Manual

24 September 2025

Zelmer ZMM1011 Manual

23 September 2025

Eta Besto 6075 90000 Manual

21 September 2025

RGV Duetto Plus Manual

21 September 2025

Zelmer ZMM3512B Manual

12 September 2025

Axis AX-MG22 Manual

10 September 2025