Home Easy HE-203 Manual

Home Easy Ikke kategoriseret HE-203

Læs gratis den danske manual til Home Easy HE-203 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Home Easy HE-203, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Caution: always make sure the switch converter is

secure in the back box when programming.

Switch Converter

Up to Six remote control units can be paired with each converter switch or

module. To pair a converter switch, connect the converter unit as per the wiring

instructions. Using a small screw driver press "Learn" button. The LED will start

to flash; press the selected "ON" button on the remote control, the LED will stop

flashing. The units are now paired together, you can test this by pressing the

selected "On/Off" button.

Deleting Remote Control:

To delete a remote control that has been paired with a HomeEasy receiver

unit, press the "Learn". The LED will start to blink; press the "Off" button on the

remote control, the LED will blink twice to confirm that the remote control has

been removed from the receiver sockets memory.

Pairing/Deleting with Remote Control:

RE-INVENTING THE HOME

HOME

easy

HE-203 Remote Control

Switch Converter & Dimmer

V1.0 Installation:

The HomeEasy remote control Switch

Converter allows you to convert a

standard 1way light switch in to a

HomeEasy remote control unit.

For use with in series with incandescent

lighting only.

INSTALLATION WARNINGS:

BEFORE COMMENCING INSTALLATION

ISOLATE YOUR MAINS ELECTRIC SUPPLY

Read the instructions care fully before starting the installation process and keep

them for future reference. If you are in any doubt on the installation process,

consult a qualified electrician.

This product should be installed in accordance with the relevant sections of

the building

regulations code, and the current edition of the IEE Wiring Regulations

(BS 7671:Requirements for electrical installations) and appropriate statutory

regulations.

As of1 April 2004, new installations in the UK should be wired using the EU

harmonised colours for the supply conductors:

New colours:

 BROWN = Live  BLUE = Neutral Earth = Yellow/Green

Old colours:

 RED = Live BLACK = Neutral

The old colours will cease from April 2006.

Electrical installations in bathrooms, kitchens, gardens, floor and heating systems,

swimming

pools, saunas and extra-low voltage lighting are classed as special installations and

must

Do not install ceiling receivers on lighting circuits used to supply other

products such as extractor fans and shaver socket outlets.

Do not exceed the Maximum Power Rating of 210W, Incandescent lighting

only

Origional Switch

240V ~50Hz

Do not use the switch converter with low voltage lighting transformers,

fluorescent bulbs, and energy saving lighting or fans, incorrect installation may

damage the converter. In case of any doubt consult a qualified electrician.

1: Isolate the mains supply, then remove the existing switch and disconnect the

wiring from the switch terminals on the back of the light switch.

2: Ensure the wall box is free from plaster lumps, projecting screw heads or any

other material. The switch converter is designed to fit in a 25mm back box, if

required a deeper back box or a proprietary spacer can be used between the

switch and the wall.

3: Wire the mains cable to the converter switch as per the diagram below:

240V Input

4: Connect the two switching wires from the switch converter to the original

light switch, making sure 1 way operation is used.

5: Make sure all terminals and earth connections are correct and secure with

no bare wires showing.

You will now need to program the switch converter:-

Making sure the live cable is connected to " " terminal and, the switch live

wire to the " " terminal.

6: Gently replace the switch cover making sure no wires are caught between

the switch and the wall. Do not over tighten as this could crack or distort the

switch.

Reconnect the mains supply

Learn Button

Produkt Specifikationer

Mærke:	Home Easy
Kategori:	Ikke kategoriseret
Model:	HE-203

Har du brug for hjælp?

Hvis du har brug for hjælp til Home Easy HE-203 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Home Easy Manualer

Home Easy HE-209 Manual

2 August 2024

Home Easy HE-210 Manual

2 August 2024

Home Easy HE-300 Manual

2 August 2024

Home Easy HE-204 Manual

2 August 2024

Home Easy HE-100 Manual

2 August 2024

Home Easy HE-301 Manual

2 August 2024

Home Easy HE-307 Manual

29 Juli 2024

Home Easy HE-203 Manual

27 Juli 2024

Home Easy HE-220 Manual

25 Juli 2024

Home Easy HE-302 Manual

25 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vevor SC02 Manual

1 December 2025

Vevor LD-HS1 Manual

1 December 2025

Vevor RD-VV-22 Manual

1 December 2025

Vevor NNJ-Y50 Manual

1 December 2025

Vevor SC-CJ-601 Manual

1 December 2025

MDT BE-TAL550206.A1 Manual

1 December 2025

Vevor LY-05 Manual

1 December 2025

Vevor SSH-1S-150-0 Manual

1 December 2025

Vevor SS-003-4P-WH Manual

1 December 2025

Vevor WK320016-2 Manual

1 December 2025