Honeywell RDWL515P Manual


Læs gratis den danske manual til Honeywell RDWL515P (24 sider) i kategorien Dørklokke. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Honeywell RDWL515P, eller vil du spørge andre brugere om produktet?

Side 1/24
Home
RDWL515P2000
Installation and Operation Guide
Plug-In Wireless Doorbell
Preparation
Doorbell
Push
Button
Flat Head
Screws
Phillips Screwdriver
Standard Screwdriver
Push Button Mounting
Bracket
and Adhesive Pad
To install you will needIn the box you will find
The push button supplied with this kit is pre-programmed to operate with the doorbell.
If it is not, see “Connect a Push Button” on page 5.
CR2032
Battery
2
Change the Light Pattern
Press the Sunlight button to change the lights that ash
when the doorbell rings.
Press the Sunlight button
1 time 2 times 3 times 4 times
Halo light and
top lights
Halo light only Top lights only No lights
Overview
Just follow these simple steps:
1. Install the push button battery and plug in the doorbell.
2. Set up the doorbell and your preferences.
3. Install the push button.
Indoor use only. Do not expose to liquid, vapor, or rain.
Power-up
1. Choose an outlet location that is not near a heat
source, where the doorbell will be easy to see and
hear, and plug in the doorbell.
2. Open the push button battery cover and install the
CR2032 battery.
Setup and Operation
Press the push button to test whether it is paired with the doorbell. The
doorbell will light up and ring. If it does not, seeConnect a Push Button” on
page 5.
+


Produkt Specifikationer

Mærke: Honeywell
Kategori: Dørklokke
Model: RDWL515P

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell RDWL515P stil et spørgsmål nedenfor, og andre brugere vil svare dig