Hooker 5048-85122 Manual

Hooker Tabel 5048-85122

Læs gratis den danske manual til Hooker 5048-85122 (2 sider) i kategorien Tabel. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Hooker 5048-85122, eller vil du spørge andre brugere om produktet?

Side 1/2
1/2
ASSEMBLY INSTRUCTION
Item#:5048-85122 THREE DRAWER THIN CONSOLE
** Please make sure you have all parts indicated below prior to assembly.
NO. HARDWARE LIST Q'TY
PLASTIC ANCHOR 2
2HOOK
F
E
A
C
B
DD
C
C
A
B
Diagram 1
Diagram 2
Assembly Steps:
1. Place console top (D) upside down on a soft surface to prevent from scratching top.
2. Attach posts (C) to top in a clockwise direction (See diagram 1).
3. Put bottom panel (B) on posts (C); insert bun feet (A)to posts through the bottom panel in a
clockwise direction (See diagram 2).
4. Turn the console upright.
2/2
ANTI-TIP RESTRAINTS
E
Diagram 3
1. Place the console in a desired location. Mark wall with pencil.
2. Drill two holes into the wall using 1/4”drill bit and insert the plastic anchors (F).
3. Screw hook (E) into plastic anchor (F). Check and make sure the plastic anchor (F) is securely
held in the wall.
4. Set console in place and hang the metal rings attached at back of console onto the hook (E)
(See diagram 3).
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water
solution. Polish the finish with soft cloth and an industry recognized furniture polish.


Produkt Specifikationer

Mærke: Hooker
Kategori: Tabel
Model: 5048-85122

Har du brug for hjælp?

Hvis du har brug for hjælp til Hooker 5048-85122 stil et spørgsmål nedenfor, og andre brugere vil svare dig