Vaxcel Taylor P0371 Manual

Vaxcel Lys Taylor P0371

Læs gratis den danske manual til Vaxcel Taylor P0371 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vaxcel Taylor P0371, eller vil du spørge andre brugere om produktet?

Side 1/2
211102
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.
P0371
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box.
Installation Steps
Hardware Package(included):
Mounting Strap Unit (A) Wire Connector (C)Mounting Screw (B)
Loop Lock (D)
Chain (E) Bolt Nut (F)
Bolt Nut-1
Set Screw
1. Attach the mounting strap unit (A) to the outlet box
using two mounting screws (B).
2. Install four belts with the set screws and the bolt nuts-1.
3. Choose the length of the chain (E) you need,
use pliers (not included) to open and remove
excess chain section, then weave the fixture
wire and the fixture ground wire through the
chain (E) and canopy.
4. Connect one end of the chain (E) with the
loop on canopy by using a loop lock (D).
5. Connect the other end of the chain (E) with the
fixture loop by using another loop lock (D).
6. Thread the fixture wire and fixture ground
wire through mounting strap unit (A).
Mounting Strap Unit (A)
Mounting Screw (B)
Lock Nut
Wire Connector (C)
Fixture Mounting Screw
Green Ground Screw
Outlet Box
Canopy
Bolt Nut (F)
Loop Lock (D)
Loop Lock (D)
Fixture Loop
Fixture
Belt
Set Screw
Bolt Nut-1
Chain (E)
Medium Base Bulb
Max.60W (not included)


Produkt Specifikationer

Mærke: Vaxcel
Kategori: Lys
Model: Taylor P0371

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel Taylor P0371 stil et spørgsmål nedenfor, og andre brugere vil svare dig