Hooker 5070-10563 Manual

Hooker Skrivebord 5070-10563

Læs gratis den danske manual til Hooker 5070-10563 (2 sider) i kategorien Skrivebord. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Hooker 5070-10563, eller vil du spørge andre brugere om produktet?

Side 1/2
1
/
2
DISASSEMBLY INSTRUCTION
Item#: 5070-10563 EXECUTIVE DESK
Caution: Please read all instructions carefully before starting the removal process.
This unit is heavy and can best be assembled with the help of two or more persons.
For easier delivery, the desk can be taken apart as shown below.
L-shaped metal plates and screws (M) under the front edge of top panel, and remove top
panel from desk. (see Diagram 1)
Diagram 1
Step 2. Loosen two bolts (I), lock washers (J), at washers (K) at wood cleats under left bottom panel
through the holes by using allen wrench (H), and then repeat the steps at right side. (See
diagram 2, arrow indicated)
2/
2
Diagram 2
Step 3: Loosen the remaining 4 bolts (I), lock washers (J), at washers (K) attached at wood cleats
under left bottom panel by using allen wrench (H) from the bottom, and then repeat the steps at
right base, then take othe top section(C).(see Diagram 3).
Diagram 3
Step 4: loosen four bolts (I), lock washers (J), at washers (K) attached the back panel (D) to the desk
with allen wrench (H) and separate back panel (D) by pulling it upright. (see Diagram 4)
Diagram 4
Cleaning Instruction: Clean nished parts with a mild dishwashing liquid and water solution on
a damp cloth. Polish the nish with soft cloth and an industry recognized furniture polish.
D
C


Produkt Specifikationer

Mærke: Hooker
Kategori: Skrivebord
Model: 5070-10563

Har du brug for hjælp?

Hvis du har brug for hjælp til Hooker 5070-10563 stil et spørgsmål nedenfor, og andre brugere vil svare dig