Hooker 5750-75206-MWD Manual

Hooker Tabel 5750-75206-MWD

Læs gratis den danske manual til Hooker 5750-75206-MWD (3 sider) i kategorien Tabel. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Hooker 5750-75206-MWD, eller vil du spørge andre brugere om produktet?

Side 1/3
ASSEMBLY INSTRUCTION
Item# - - 5750 75206 MWD Friendship Table
** Please make sure you have all prior to assembly.parts indicated below
This peopletable is heavy and can best be assembled with the help of two or more .
Diagram 1
Note:
Height of this table can be adjusted with or without extension block. (30” and 36” heights)
Assembly steps with extension blocks:
1 .Attach mounting bridge (H) with (F) by inserting bolts (B), llegs to table top (K) ock
washers ( ) and flat washers ( tighten with allen wrench (A) (See Diagram C D), 1)
2 .Attach base frame (J) to legs (F) by inserting bolts (E), lock washers (C) and flat
washers (D), tight 1) en with allen wrench (A) (See Diagram
3.Turn table upright.
1/3
Assembly steps without extension blocks:
2 3 Diagram Diagram
Diagram 4
1. Unscrew bolts ( ) and flat washers (B C), lock washers ( D) from mounting bridge (H ).
2. emove R extension blocks (G) from legs(F) in counter clockwise direction with care.
3. Attach mounting bridge (H) to legs (F) by inserting bolts (B), lock washers (C) and flat
washers (D), tighten with allen wrench (A) (See Diagram 3).
4. Attach mounting bridge (H) to table top (K) by inserting bolts (B), lock washers (C) and
flat washers (D), tighten with allen wrench (A) (See Diagram 4)
5. Attach base frame (J) to legs (F) by inserting bolts (E), lock washers (C) and flat
washers (D), tighten with allen wrench (A) (See 4) Diagram
6. Turn table upright. 2/3


Produkt Specifikationer

Mærke: Hooker
Kategori: Tabel
Model: 5750-75206-MWD

Har du brug for hjælp?

Hvis du har brug for hjælp til Hooker 5750-75206-MWD stil et spørgsmål nedenfor, og andre brugere vil svare dig