Hooker 5751-75200T-95 Manual

Hooker Tabel 5751-75200T-95

Læs gratis den danske manual til Hooker 5751-75200T-95 (3 sider) i kategorien Tabel. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Hooker 5751-75200T-95, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

ASSEMBLY INSTRUCTION

Item#:5751-75200T- 84in Rectangular Dining Table Top w-2/22in 95

-75200B- Rectangular Dining Table Base 5751 95

** Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two or more people.

Diagram 1 Diagram 2 Diagram 3

Note:

1. Height of this table can be adjusted with or without extension block. (30” and 36” heights)

1/3

2/3

Assembly steps with extension blocks:

1. Well place 2pcs of top stretchers between side frames (H), ing bolts (F), lock washers (Cus )

and at washers (D), don t tighten up at this step. (See Diagram 1).Then place bottom ’

stretcher between pedestals (H), ing bolts (G), lock washers (C) and at washers (D), us

secure all by turning with allen wrench (A) in clockwise direction. (See Diagram 1).

2. Attach the extension blocks(L) to the side frames.Then attach the base rails (O) to the side

frames extension blocks by using bolts (E), lock washers (C) and at washers (D), with

tighten all with allen wrench (A). (See Diagram 2)

3. Place table top (P) upside down on a soft surface to prevent it from being scratched.

Put whole base onto top to make sure all pre-drilled holes are in alignment, well insert

bolts (F lock washers (C) and at washers (D), tighten bolts by turning with allen ),

wrench (A) in clockwise direction. (See Diagram 3)

Assembly steps without extension blocks:

Diagram 4 Diagram 5 Diagram 6

4.Unscrew bolts (E), lock washers (C) and at washers (D) from base rails (O (See Diagram 4).)

5.Remove the extension blocks (L) from the side frame .

6. Attach base rails(O) to the side frame by using bolts (B), lock washers (C) and at washers (D),

tighten all with allen wrench (A). (See Diagram 5)

7. ng scratched. Place table top (P) upside down on a soft surface to prevent it from bei

Put whole base onto top to make sure all pre-drilled holes are in alignment, well insert

bolts (F), lock washers (C) and at washers (D), tighten bolts by turning with allen wrench

(A) in clockwise direction. (See Diagram 6)

8. Turn table upright.

Produkt Specifikationer

Mærke:	Hooker
Kategori:	Tabel
Model:	5751-75200T-95

Har du brug for hjælp?

Hvis du har brug for hjælp til Hooker 5751-75200T-95 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tabel Hooker Manualer

Hooker 1652-75410-MWD Manual

8 Juli 2025

Hooker 5750-75401-LTWD Manual

6 Juli 2025

Hooker 5751-75203T-95 Manual

29 August 2024

Hooker 1618-75007-DKW Manual

29 August 2024

Hooker 864-80-112 Manual

29 August 2024

Hooker 366-75-218 Manual

29 August 2024

Hooker 1600-75001-MWD Manual

29 August 2024

Hooker 5840-75200-80 Manual

29 August 2024

Hooker 5990-75200-LTWD Manual

29 August 2024

Hooker 5805-75200T-85 Manual

29 August 2024

Tabel Manualer

Nyeste Tabel Manualer

30 Juli 2025

29 Juli 2025

29 Juli 2025

29 Juli 2025

Ikea BUSLÄTT 706.011.35 Manual

27 Juli 2025

Ikea VILDGÅS 705.893.98 Manual

27 Juli 2025

Ikea BUSLÄTT 906.011.39 Manual

27 Juli 2025

Ikea NÄSINGE 805.875.82 Manual

27 Juli 2025

Ikea NÄSINGE 205.875.04 Manual

27 Juli 2025

Ikea NÄSINGE 905.875.05 Manual

27 Juli 2025