Hooker 5820-75206-84 Manual

Hooker Tabel 5820-75206-84

Læs gratis den danske manual til Hooker 5820-75206-84 (3 sider) i kategorien Tabel. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 26 anmeldelser. Har du et spørgsmål om Hooker 5820-75206-84, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

ASSEMBLY INSTRUCTION

Item#:5820- 6- Friendship Table 7520 84

** Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two or more people.

Diagram 1 Diagram 2

Note:

1. Leaves cannot be switchable. Follow numbers on leaves and top when assemble

2. Height of this table can be adjusted with or without extension block. (30” and 36” heights)

3.Please follow numbers on the side frames and letters on the top & bottom stretcher during

assembly.

1/3

2/3

Assembly steps with extension blocks:

1. Put two side frames & L) upside down on a soft surface to prevent it from being scratched. (K

2. her Place the ends of top stretc (J) bottom stretcher (E) into side frames ( K&L ) make & to

sure all pre-drilled holes are in alignment , first insert bolts (F), at washers (C) and lock

washers (B), ts (H), tighten bolts by turning with spanner wrench (G) to assemble the top nu

stretcher (J) (See Diagram 1).

3. Then insert bolts (F), at washers (C) and lock washers (B), nuts (H), tighten bolts by turning

with spanner wrench (G) to assemble the bottom stretcher (E) (See Diagram 1).

4. Place table top (O) upside down on a soft surface to prevent it from being scratched.

Put whole base onto top to make sure all pre-drilled holes are in alignment, well insert

bolts (A), lock washers (B) and at washers (C), tighten bolts by turning with allen

wrench (D) in clockwise direction (See Diagram 2).

Assembly steps without extension blocks:

Diagram 3 Diagram 4

4.Unscrew bolts (E), lock washers (B) and at washers (C and remove the extension blocks from )

the side frames ( ) K&L (See Diagram 3).

5.Place table top (O) upside down on a soft surface to prevent it from being scratched. Put

whole base onto top to make sure all pre-drilled holes are in alignment, well insert bolts

(E lock washers (B) and at washers (C), tighten bolts by turning with allen wrench (D) i), n

clockwise direction (See Diagram 4).

6. Turn table upright.

Produkt Specifikationer

Mærke:	Hooker
Kategori:	Tabel
Model:	5820-75206-84

Har du brug for hjælp?

Hvis du har brug for hjælp til Hooker 5820-75206-84 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tabel Hooker Manualer

Hooker 1652-75410-MWD Manual

8 Juli 2025

Hooker 5750-75401-LTWD Manual

6 Juli 2025

Hooker 5751-75203T-95 Manual

29 August 2024

Hooker 1618-75007-DKW Manual

29 August 2024

Hooker 864-80-112 Manual

29 August 2024

Hooker 366-75-218 Manual

29 August 2024

Hooker 1600-75001-MWD Manual

29 August 2024

Hooker 5840-75200-80 Manual

29 August 2024

Hooker 5990-75200-LTWD Manual

29 August 2024

Hooker 5805-75200T-85 Manual

29 August 2024

Tabel Manualer

Nyeste Tabel Manualer

30 Juli 2025

29 Juli 2025

29 Juli 2025

29 Juli 2025

Ikea BUSLÄTT 706.011.35 Manual

27 Juli 2025

Ikea VILDGÅS 705.893.98 Manual

27 Juli 2025

Ikea BUSLÄTT 906.011.39 Manual

27 Juli 2025

Ikea NÄSINGE 805.875.82 Manual

27 Juli 2025

Ikea NÄSINGE 205.875.04 Manual

27 Juli 2025

Ikea NÄSINGE 905.875.05 Manual

27 Juli 2025