Hooker 638-50012 Manual


Læs gratis den danske manual til Hooker 638-50012 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Hooker 638-50012, eller vil du spørge andre brugere om produktet?

Side 1/1
ASSEMBLY INSTRUCTION
Item#: 638-50012 Glamour Floor Mirror
*** Caution: Please read all instructions carefully before starting the assembly process.
This item is heavy and be best to carry on the following steps with the help of two or more people.
Assembly Steps:
1. Screw 3 “L” shape metal brackets(D) onto the top of the mirror using a Phillips Head screwdriver,
2 screws(B), 2 flat washers(C). You can adjust the distance between the mirror to the wall by
relocating “L” shape metal bracket (D) as you need.
2. Mark the location of the screw holes of the “L” shape brackets(D) on the wall, drill 3 holes on
the wall where you marked using 1/4” drill bit.
3. Insert 3 plastic anchors(E) into the holes.
4. Place the mirror to the wall, align the holes on the “L” shape bracket(D) to plastic anchors(E),
screw the “L” Shape brackets to the anchors(E), using a Phillips Head screwdriver.
5. Tighten all screws on the top of the mirror after attaching “L” shape bracket to the wall.
All hardware mentioned above is packed in a small box. Please make sure not to throw it away.
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a
damp cloth. Polish the finish with soft cloth and an industry recognized furniture polish.


Produkt Specifikationer

Mærke: Hooker
Kategori: Ikke kategoriseret
Model: 638-50012

Har du brug for hjælp?

Hvis du har brug for hjælp til Hooker 638-50012 stil et spørgsmål nedenfor, og andre brugere vil svare dig