Hosa USQ-110 Manual

Hosa Ikke kategoriseret USQ-110

Læs gratis den danske manual til Hosa USQ-110 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Hosa USQ-110, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
TRACKLINK Guitar to USB Interface
Connection and Setup Procedures
Thank you for purchasing the TRACKLINK Guitar to USB Interface by Hosa
Technology. This interface enables you to connect your electric guitar, bass, or
keyboard directly to your computer. To get linked and start tracking, please follow these
instructions carefully:
Connection Procedure
1. Plug the ¼ in TS connector into your instrument
2. Plug the USB connector into your PC
3. Follow the appropriate setup procedure below
Mac OS 10 Setup Procedure
1. Go to Apple Menu > System Preferences and click Sound
2. Click the “Input” tab
3. Select “USB PnP Sound Device”
4. Input level of your computer should reflect incoming signal*
5. Click the “Output” tab
6. Verify your normal output option is selected**
7. Close window
Windows 10 Setup Procedure
1. Allow Windows to install the driver before proceeding
2. Go to Start Menu > Windows System > Control Panel
3. In Category View, open Hardware & Sound
4. Open Sound
5. In “Playback” tab, select your desired playback option and click the
“Set Default” button**
6. Click the “Recording” tab
7. Select “USB PnP Sound Device” and click the “Set Default” button
8. You can verify and adjust input levels by clicking the “Properties” button*
9. If you made any changes, click the “Apply” button
10. Click the “Okay” button
Windows 7 Setup Procedure
1. Allow Windows to install the driver before proceeding
2. Go to Start > Control Panel
3. In Category View, open Hardware & Sound
4. Open Sound
5. In “Playback” tab, select your desired playback option and click the
“Set Default” button**
6. Click the “Recording” tab
7. Select “USB PnP Sound Device” and click the “Set Default” button
8. You can verify and adjust input levels by clicking the “Properties” button*
9. If you made any changes, click the “Apply” button
10. Click the “Okay” button

Produkt Specifikationer

Mærke: Hosa
Kategori: Ikke kategoriseret
Model: USQ-110

Har du brug for hjælp?

Hvis du har brug for hjælp til Hosa USQ-110 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Hosa Manualer

Hosa

Hosa USQ-110 Manual

5 November 2025
Hosa

Hosa CDL-313 Manual

4 September 2024
Hosa

Hosa MID-300BK Manual

19 Juni 2024
Hosa

Hosa ACD-477 Manual

19 Juni 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MuxLab

MuxLab 500439 Manual

5 November 2025
GVM

GVM BL160-II Manual

5 November 2025
Uniprodo

Uniprodo UNI_ROLL_03 2in1 Manual

5 November 2025
Rockville

Rockville SS6 Manual

5 November 2025
Silk'n

Silk'n VacuPedi FTC04 Manual

5 November 2025
MEPROLIGHT

MEPROLIGHT MCO PRO Manual

5 November 2025
XPG

XPG Battlecruiser II Manual

5 November 2025
JMAZ

JMAZ Centipede Quadro Manual

5 November 2025
Lake People

Lake People Mic-Amp F311-D Manual

5 November 2025
Wooden Camera

Wooden Camera 162100 Manual

5 November 2025